Are you looking to buy a Crux35 Analog BNF in Australia?
The Happymodel Crux35 Analog is an ultra-lightweight 3.5" drone by Happymodel is an excellent micro racing drone that comes with the CrazyF411 flight controller, EX1404 brushless motors, and the CaddxAnt FPV Camera. The HQPROP 3.5-inch three-blade propellers ensure the largest thrust-to-weight ratio.
Receiver options: Integrated SPI ELRS or SPI FrSky D8/D16
Note: SPI FrSky version comes with Betaflight 3.5.7 firmware in order to get a better RSSI range. Bind code is “Frsky_bind” in the CLI Command.
VIDEO: Long Flight time Rippin // Crux35 // Super Agile!!
Features
- Integrated ExpressLRS SPI receiver or Frsky SPI D8/D16 receiver
- Ultra-lightweight 3.5-inch BNF FPV Freestyle Drone
- High efficiency EX1404 power system
- Analog video transmission
- Supports 3-4S battery
Specifications
- Receiver option: SPI ExpressLRS 2.4GHz or SPI Frsky D8/D16 (S-FHSS compatible)
- Size: 130mmx130mmx45mm (without propellers)
- Flying time: 9min~15min 4s 750mah battery
- Weight: Crux35 Analog 87gram
- Product name: Crux35 Analog
- Camera option: Caddx Ant
- Wheelbase: 150mm
- Brand: Happymodel
CADDX ANT CAMERA
- Model: Caddx Ant - 1200TVL 1.8mm FPV Nano Camera (14x14)
- Electronic Shutter: PAL: 1/50~100, 000; NTSC: 1?60~1000, 000
- Dimensions: 14*14mm (with a bracket to 19*19mm)
- TV System: NTSC & PAL (Changeable)
- Image Sensor: 1/3" CMOS Sensor
- Min. Illumination: 0.001Lux@F1.2
- Horizontal Resolution: 1200TVL
- Work Temperature: -20C~+60C
- S/N Radio: >52dB (AGC OFF)
- Wide Power Input: DC 3.7-18V
- Work Humidity: 20%~80%
- Synchronization: Internal
- Auto Gain Comtrol: Yes
- Video Output: CVBS
- WDR: Global WDR
- Image: 16:9 or 4:3
- Weight: 2g (N.W.)
- Menu: Support
- DNR: 3D DNR
- Lens: 1.8mm
- Color: Black
- BLC: Yes
OVX303 5.8Ghz VTX
- Transmitting Power: 0/RCE/25mw/100mw/300mw
- Weight: 1.5gram without antenna
- Current (5v): <650ma (300mw)
- Frequency: 5.8G 40CH
- Power supply: DC 5V
- Model: OVX303
CrazyF411 FC
- Power supply: 2-4S battery input (DC 8V-17V)
- Built-in Frsky D8/D16 SPI receiver built-in 2.4G Power Amplification
- Built-in voltage detectionFirmware target: MATEKF411RX
- Built-in 20A(each) Blheli_S 4in1 ESC Dshot600 ready
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: MPU-6000(SPI connection)
- Built-in Betaflight OSD(SPI Control)
- Board size: 28.5 * 28.5MM
- Built-in Current meter
- Built-in 5V 1.5A BEC
ONBOARD ESC
- Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
- Factory firmware: O_H_5_REV16_8.HEX
- Support BLHeliSuite programmable
- MCU upgraded to EFM8BB21
- Default protocol: DSHOT300
PROPELLERS
- Propeller Diameter: 3.5 inch
- Material: PolyCarbonate
- Hub Thickness:4.7mm
- Hub Diameter: 10mm
- Shaft :1.9/1.5/1.9mm
- Adaptor Rings: NO
- Weight: 1.5g
- Blades : 3
- Pitch: 2
MOTORS
- Motor Dimension(Dia.*Len):Φ15mm*15mm
- Shaft Diameter: Φ1.5mm
- Configurration:9N12P
- Stator Diamter:14mm
- KV options: KV3500
- Stator Length:4mm
- Model: EX1404
- Weight(g):9g
Recommended (Not Included)
- Battery: 4S 750mAh or maximum 4S 1100mAh
Includes
- 1X Happymodel Crux35 4S Analog Freestyle Racing Drone w/ Caddx Ant Camera (ELRS or FrSky Options)
Browse more
- Browse all BNF
- Browse all HappyModel
- Browse all ELRS