ExpressLRS is now available at PhaserFPV! We are only stocking ELRS 2.4GHz receivers and modules for the time being. ELRS is an open-source RC link for RC & FPV applications. It is based on the fantastic Semtech SX127x/SX1280 hardware combined with an ESP8285, ESP32 or STM32 – designed to have very low latency and packet loss.
Once you’ve unpacked your new ExpressLRS module and mounted it in an appropriate location, there are just a few easy steps to get it up and running. First, connect the included external antenna to the module's antenna port. Next, connect the module to an available USB port on your computer. Once the module is connected, you will need to install the provided software. The software includes a simple interface for configuring the module.
Once you have configured the module, you can begin using it to control your quad. The ExpressLRS module is a powerful and easy-to-use tool that will help you take your drone-flying experience to the next level.
Getting the most out of your new ExpressLRS module is easy. First thing’s first – be sure to charge the module for at least four hours before first use. Once charged, you can power on the module by pressing and holding the button for three seconds (the blue LED will blink three times to indicate that the module is on). Next, open the ExpressLRS app on your mobile device and connect to the module via Bluetooth – this will allow you to access all the module's features and settings.
To begin using the module, simply select a mode from the main menu. In "normal" mode, the module will automatically adjust the light output based on ambient conditions. For more control over the light output, select "manual" mode. In this mode, you can use the app to adjust the brightness level and choose between white and colour-changing LEDs. Finally, be sure to read the safety instructions in the app before using the module. By following these simple steps, you'll be able to get started with your new ExpressLRS module right away.
Need assistance? Give us a call on (02) 4311 9090 or email firstname.lastname@example.org.