Sold Out

BetaFPV Lite Radio 3 - FrSky Mode 2

$67.00 USD

CURRENTLY IN STOCK

Add to Wishlist
SKU: 22742N/A W/H: N/A Barcode: N/A Shipping Weight: 0g N/A Categories: BetaFPV , Drone Radio Transmitters , FRSKY , Radio Gear , Tags: BetaFPV, FrSky, Transmitter

We accept the following payment methods

Are you looking to buy a BetaFPV Lite Radio 3 in Australia?

LiteRadio 3 Radio Transmitter is the newest remote control in the LiteRadio series. This transmitter features an ergonomically designed handle and has superb performance in its working time, newly updated gimbal, and multi-protocol support (Frsky version). Besides, this version supports BETAFPV Configurator which is a utility designed to simply update, configure, and tune the radio controller.

betafpv literadio 2 radio transmitter mantisfpv australia banner 1

Features

LiteRadio 3 is a remote control radio transmitter designed primarily for RC models, including multirotor, aeroplanes. It gives you more than you ever thought possible from an entry-level 8-channel radio.

  • 8 channels in total.
  • USB Joystick support for most practice simulators.
  • Nano module bay for external TX module.
  • Newly designed joystick gimbal for longer usage life.
  • Support BETAFPV Configurator for updating, configuring, and tuning.
  • Provide ExpressLRS 2.4G protocol version and Frsky protocol version for option.
  • Built-in 2000mAh battery and USB charge supported.

Bullet points

  • LiteRadio 3 upgrades with BETAFPV self-developed Customized LiteRadio System. Pilots can directly operate the Joystick Calibration and Firmware Update on the radio transmitter, which is more convenient for the beginner racer to operate.
  • Equipped with a built-in 2000 mAh 1S battery, LiteRadio 3 can work up to 15 hours without an external module, bringing an excellent endurance performance.
  • Comes with a built-in charging module, LiteRadio 3 supports USB charging which is more convenient to use. Meanwhile, it designs a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously.
  • Newly designed with a nano bay, it supports the external TX module. Highly recommend BETAFPV ELRS Nano Module, which is compatible with the LiteRadio 3 radio transmitter and makes CRSF protocol available.
  • Adopted the rubber coat, LiteRadio 3 is ergonomic and has the shape of a gaming controller. It’s comfortable to hold, and the anti-slip texture on the handles allows for a solid grip.
  • It is the safest and quickest method to get started by using a model practice simulator for starters. LiteRadio 3 radio transmitter supports most of the simulators on market with comprehensive configuration.

Specification

  • Item: LiteRadio 3 Radio Transmitter
  • Frequency Range: 2.4G
  • 2.4G System: CC2500/SX1280
  • Channel: 8
  • Support Protocol: Futaba S-FHSS/Frsky FCC D16/Frsky LBT D16/Frsky D8, ExpressLRS 2.4G
  • Power: ELRS version 25mW/50mW/100mW, Frsky version 100mW
  • Adapted Drone Type: Multirotor, Airplane
  • Support USB Charging / Firmware Update
  • Support BETAFPV Configurator / Most Practice Simulator
  • LED Light: Green-Power On / Red-Warning if the voltage is lower than 3.5V / Blue-Normal
  • Battery: Built-in 2000mAh 1S Battery
  • Charging Connector: USB 3.0 Type-C
  • Supports external TX nano module

betafpv literadio 2 radio transmitter banner 2 mantisfpv

Improvements on LiteRadio 3

Compared with LiteRadio 2 SE, the LiteRadio 3 is equipped with a 2000mAh 1S battery, bringing an excellent endurance performance up to 15 working hours without an external module. Reserving a nano bay on the backside, it supports an external module for use with ELRS Nano TX Module, which supports CRSF protocol. Moreover, the LiteRadio 3 gimbal is newly updated with an accurate potentiometer and adjustable stick ends.

betafpv literadio 3 radio transmitter frsky mode 2 mantosfpv differences

BETAFPV Configurator

BETAFPV Configurator is a utility designed to simplify updating, configuring, and tuning the radio transmitter.

Download address: https://github.com/BETAFPV/BETAFPV_Configurator/releasesThe function of the BETAFPV Configurator is listed below.

 

  • Basic radio controller setup, like mode switch, turn on/off RF modules.
  • Full function of the ExpressLRS configuration, like outpower, packet rate, etc.
  • Channel mixer for fix wing drones.
  • Firmware update.

betafpv literadio 2 radio transmitter banner 2 mantisfpv configuration

How to switch the protocol

Note: Switching internal protocol is only available for the Frsky version radio transmitter. ExpressLRS version can only switch to the external TX module.

To change protocols and TX module, here are the steps:

  • Power the radio transmitter off;
  • Press and hold the BIND button while powering the radio transmitter back on;
  • Then the flash colour and times of the LED before buzzer alarms will change, according to the tables above.
The Frsky version could support 4 different internal protocols, including Frsky D16 FCC, Frsky D16 LBT, Frsky D8, and Futaba S-FHSS. The protocol is indicated by the flashing times of the LED when power on, before the buzzer alarms.

FRSKY VERSION

  • LED STATUS: Red flash once – Internal Frsky D16 FCC (ACCST 1.X Version)
  • LED STATUS: Red flash twice- Internal Frsky D16 LBT (ACCST 1.X Version)
  • LED STATUS: Red flash three times – Internal Frsky D8
  • LED STATUS: Red flash four times – Internal Futaba S-FHSS
  • LED STATUS: Purple flash free times quickly – Internal TX Module Off and Run External TX Module

EXPRESS ELRC VERSION

  • LED STATUS: Red flash once – Internal ELRS
  • LED STATUS: Purple flash free times quickly – Internal TX Module Off and Run External TX Module

Note: LiteRadio 3 Frsky version only works with D16 ACCST 1.X Frsky protocol. So if you use a Frsky receiver with D16 ACCST 2.X version or ACCESS version, the binding will fail.

betafpv literadio 3 radio transmitter frsky mode 2 package mantisfpv

Browse more

Why Choose Phaser FPV?

Here’s Why 1000s of Buyers Trust Us

In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.

Same-Day Ship

If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.


Transparent Stock

We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.

Highly Rated

We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!

Walk In Anytime

Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.

Fast Support

We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.

We’re on Social

We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.

It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page