Sold Out

Happymodel X12 AIO 5-in-1 Board - ICM42688-P F4 FC + 12A ESC w/ ELRS Receiver

$125.00 AUD

IN STOCK ( left )

Add to Wishlist

We accept the following payment methods
       

Are you looking to buy a Happymodel X12 AIO 5-in-1 Board in Australia?

The Happymodel X12 is a 5-in-1 AIO board featuring an F4 Flight Controller, onbard 12A 4-in-1 ESC, 5.8GHz OpenVTX, and three different receiver options: PNP, FrSky, or ELRS. This AIO is great for brushless whoops with its great RX an VTX range!

5-in-1 AIO flight controller using OpenVTX (up to 400mW), 12A ESC (BLHeli_S ESC), onboard ELRS receiver (2.0 firmware), plugin connector for your motors and can take 1S or 2S batteries.

Notes: This is the V2 version capable of taking up to 2S.

Specifications:

  • FC:
    • Betaflight firmware target: CRAZYBEEF4SX1280
    • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
    • Sensor: ICM42688P
    • Mount hole size: 25.5mm*25.5mm
    • Power supply: 1-2S battery input (DC 2.9V-8.7V)
    • Built-in 12A (each) Blheli_S 4in1 ESC
    • Built-in Betaflight OSD (SPI Control)
    • Built-in 5.8G OpenVTX 0mw~400mw
    • Built-in ExpressLRS 2.4G,
    • Built-in voltage meter sensor: voltage meter scale 110
    • Built-in current meter sensor: current meter scale 470
    • Weight: 5.1g
       
  • 4in1 ESC:
    • Power supply: 1-2S LiPo/LiPo HV
    • Current: 12A continuous peak 15A (3 seconds)
    • Supports BLHeliSuite
    • Factory firmware: Z_H_30_REV16_7.HEX
    • Default protocol: DSHOT300
    • Supports Bluejay firmware
    • When using Bluejay firmware with 48khz, set startup power to 1100/1200
       
  • Receiver:
    • Packet rate options: 50Hz/150Hz/250Hz/500Hz
    • ExpressLRS firmware version: V2.0
    • RF frequency: 2.4GHz
    • Antenna : SMD antenna
    • Telemetry output Power: <12dBm
    • Receiver protocol:  SPI ExpressLRS
    • Compatible with ExpressLRS V2.0 TX Modules
    • Can’t flash ExpressLRS firmware separately
       
  • OpenVTX:
    • Firmware version: OPENVTX
    • Smartaudio v2.1
    • PIT mode supported
    • RACE mode supported
    • Channels: 48ch
    • Transmitting Power: 0/RACE/25mw/100mw/400mw
    • Power supply: DC 5V
    • Current (5v): <650ma (400mw)
    • Antenna connector: U.FL

Package:

  • 1x X12 AIO Board
  • 1x Dipole UFL Antenna
  • 1x Camera cable
  • 1x PH2.0 Pigtail
  • 1x set of screws and grommets

Browse more

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page