TBS Unify Pro 5G8 VTX Video Transmitter v3 (5V Input) (SMA)

$44.00 (inc. GST)

CURRENTLY IN STOCK

Out of stock

Order in H, M, Seconds (before 1pm AEDT) for same day despatch
Add to Wishlist

Are you looking to buy TBS Unify PRo 5G8 VTX Video Transmitter in Australia?

This VTX is SMA with NO pin. - It Takes a SMA Antenna

NEW IN V3:

  • Improved Voltage spikes acceptance from 6.5Vmax. on V2 to 13Vmax. on V3

A video transmitter just for racers. 5g weight, 25 - 800mW output power (user adjustable). Cutting weight and flying far has never been this easy and affordable.Antenna Connector: SMA Female Socket

The smallest and most powerful (800mW!) video transmitter the world has ever seen! It's race ready with PitMode, a super-clean and interference free power levels, and connectivity to flight controllers and other means of quickly changing channels. It runs off a filtered 5V power supply, so it's perfect when being connected to a TBS CORE PRO or TBS PowerCube (*)

    MAIN FEATURES

    • Smallest, lightest video transmitter on the market
    • Up to 800mW of output power
    • Ultra-clean transmission (up to 16 pilots at once!)
    • PitMode - power up your quad during a race
    • Easy OSD, FC and RC channel changes, with fallback button menu
    • Robust RF amplifier allows powering up without antenna for hours!
    • Clean powerup and video switching
    • CE certified

    PITMODE - MADE TO RACE

    Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels. 

    SMARTAUDIO V2 - FULL CONTROL

    SmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!

    CLEANSWITCH - NEIGHBOR FRIENDLY

    CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)

    SAY NO! TO DIPSWITCHES

    Even though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies. 

    SPECIFICATIONS

    • Operating Voltage: 4.5 - 5.5V
    • Supply current: 600mA
    • Operating Temperature: watch for normal airflow
    • Audio carrier Frequency: 6.5 MHz
    • Video Input Impedance: 75 Ohm
    • Weight: 5g (with SMA, without antenna)
    • Antenna Connector: SMA Female Socket with screw mounting holes
    • Video Format: NTSC/PAL
    • Output Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW*)

    INCLUDED

    * HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure.

    Why Choose Phaser FPV?

    Here’s Why 1000s of Buyers Trust Us

    In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.

    Same-Day Ship

    If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.


    Transparent Stock

    We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.

    Highly Rated

    We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!

    Walk In Anytime

    Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Gosford NSW Australia. You’ll get to meet one of our friendliest – and fluffiest – employees, the Phaser FPV house dog, Piper!

    Fast Support

    We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.

    We’re on Social

    We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.

    It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV, 3D Printing and PEV Vehicles, don’t settle for less. Demand the best – insist on Phaser FPV.

    Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
    January,February,March,April,May,June,July,August,September,October,November,December
    Not enough items available. Only [max] left.
    Shopping cart

    Your cart is empty.

    Return To Shop

    Add Order Note Edit Order Note
    Estimate Shipping
    Add A Coupon

    Estimate Shipping

    Add A Coupon

    Coupon code will work on checkout page

    USD

    Select your currency

    TBS Unify Pro 5G8 VTX Video Transmitter v3 (5V Input) (SMA)

    $44.00