Are you looking to buy an Nozzle Hard Mounted ADXL345 Accelerometer by provok3d / Boxxy in Australia?
The hole in the PCB is designed to fasten the device directly onto the heater block with the nozzle “hard mounting”, which eliminates the need for additional hardware and reduces installation complexity. The device can be easily installed and removed from the heater block with the nozzle without the need for additional tools.
When it comes to mounting an accelerometer, hard mounting is generally considered to be a better option compared to using plastic mounting.
Here are some reasons why:
Better accuracy: Hard mounting an accelerometer directly onto the surface of the test object provides a more accurate measurement of the vibration. This is because the accelerometer is in direct contact with the object, and there is no potential for the accelerometer to shift or move during testing, which could introduce errors in the measurement. In contrast, plastic mounting can introduce some flexibility or movement between the accelerometer and the test object, which can lead to inaccuracies in the measurement.
Increased sensitivity: Hard mounting an accelerometer can increase its sensitivity to low-level vibrations. By mounting the accelerometer directly onto the surface of the test object, it can pick up even subtle vibrations that might not be detected using a plastic mounting. This can be particularly important for applications where precise measurement of low-level vibrations is critical.
They will be flashed with https://github.com/XBoxxyX/ampon_anchor and tested for 3 axis functions before shipping. You may flash klipper direct if you need.
- Pat Pending
- 4 Layer PcB
- Surface finish: ENIG/gold plated INFO HERE
- Mounts where you need to measure vibrations
- No extra parts needed for installation
- Stm32 based Shipped/Pre flashed with Ampon a fork of Crampon
- Plug n Play
Klipper requires the following config:
[mcu ampon] serial: /dev/serial/by-id/usb-Anchor_Ampon-if00 [adxl345] cs_pin: ampon:CS [resonance_tester] accel_chip: adxl345 probe_points: 90, 90, 20
Installation:
- Heat hotend to the temperature appropriate to the filament loaded (eg. 240-250c for ABS) and unload.
- If necessary, heat hotend to the temperature at which the nozzle was tightened and remove nozzle.
- Power off the printer
- Allow the hotend to cool completely.
- Install the sensor, securing the pcb to the hotend with the nozzle and connect pcb to the pi with the included cable.
- Perform required resonance measurement
*Do Not heat the hotend with the Nozzle mounted ADXL installed* - Once measurements/tuning are complete, remove and reinstall / hot tighten your nozzle
For further information please visit:
Provoke3D / Boxxy’s nozzle mounted ADXL Github repository
https://github.com/XBoxxyX/ampon_anchor
Klipper’s Resonance Compensation documenations:
https://www.klipper3d.org/Resonance_Compensation.html
https://www.klipper3d.org/Measuring_Resonances.html
Browse more
- Browse all Voron Parts and accessories
- Browse all 3D Printer Parts and Accessories
Why Choose Phaser FPV?
Here’s Why 1000s of Buyers Trust Us
In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.
Same-Day Ship
If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.
Transparent Stock
We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.
Highly Rated
We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!
Walk In Anytime
Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.
Tech Precision
Our handpicked team of technology experts specialize in – and are boffins on – every product we sell. This means they can answer any and all of your technical questions with confidence. Go ahead, put us to the test.
Fast Support
We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.
Get Rewarded
Score a FREE gift on first and recurring orders, and discount shipping on orders over $99.
We’re on Social
We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.
It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.
