Are you looking to buy BMS Racing JS-2 HDZero Frame in Australia?
This is the primary racing machine for the BMS Racing team. Developed for the purpose of competing internationally for the 2023 season in a team environment, there are a host of changes from the original JS-1 to suit the new requirements.
Note: TPU Pod & TPU parts not included. They can be purchased separately in our JS-2 collection or STLs downloaded for free.
The prototype analog version of this frame won the 2023 New Zealand Open along with the 2023 Australian International Airshow Drone Racing Open .
These changes include:
-Fits larger ESCs such as Foxeer Reaper 60A slim with rearward XT60 & factory Capacitor.
-Improved aerodynamic balance
-Improved weight distribution
-Arm bolts are independent from the stack bolts (easier arm replacement)
-Optional locked in Camera tilt (tilt range is 25-75 degrees)
-True X Layout, improved efficiency below 45 degrees angle during forward flight.
-Airframe weight in standard config including TPU (No electronics or motor bolts) is ~76g (Analog) or ~80g (HDZero)
Kit Includes:
Everything needed to build the frame, less the TPU Parts and Electronics.
So Battery Pad, Battery Strap is included in the kit.
Recommended parts list (HDZero):
VTX Antenna: TBS Triumph pro (U.Fl for standard TPU)
VTX: HDZero Race V3 or Foxeer HDZero VTX
Camera: HDZero 90FPS Cam with lens upgrade
FC: Foxeer F7 or H7 FC 20x20 (note if 10v bec required - get the appropriate FC that can supply the right power output for your HDZero VTX depending on if you choose one with 5V or 10V requirement or you may choose to run a BEC instead)
ESC: Foxeer Reaper 60A Slim
Propeller: Gemfan 51366 V3, Gemfan 5127, Gemfan 51466 V2 or HQProp BMS
Gemfan v2 or v3? For most tracks the V3 is the better race prop / feel, however if you need to break the 200km mark then the V2
Motor: T-Motor BMS Raptor V2
Battery: Tattu R-Line V5 1400 or GNB 1300 or GNB 1500
RX: TBS Tracer, TBS Crossfire or Radiomaster ELRS
Recommended parts list (Analog):
VTX Antenna: TBS Triumph pro (U.Fl for standard TPU)
VTX: TBS Unify Pro (32 nano or nano)
Camera: Predator nano
FC: Foxeer F7 or H7 FC 20x20
ESC: Foxeer Reaper 60A Slim
Propeller: Gemfan 51366 V3, Gemfan 5127, Gemfan 51466 V2 or HQProp BMS
Gemfan v2 or v3? For most tracks the V3 is the better race prop / feel, however if you need to break the 200km mark then the V2
Motor: T-Motor BMS Raptor V2
Battery: Tattu R-Line V5 1400 or GNB 1300 or GNB 1500
RX: TBS Tracer, TBS Crossfire or Radiomaster ELRS
Tune will be available as a preset soon, but for now just contact Thomas Bitmatta (@bmsthomas_ on instagram)
Change Log:
6th Sept 2023 - Arms no longer chamfered - Price reduced
JS-2 HDZero Build Guide
Note: the Bolt sizes used on the frame and in particular the 6 bolts that lock in the roll cage in conjunction with the standoffs. At either end you use 6mm bolts and in the mid section you use 8mm bolts which allows for the TPU VTX antenna mount.
When installing the TPU VTX antenna mount, the 8mm only need to be just nipped up. Do not over tighten them as they TPU will make sure they don't come loose.
HD-Zero Whoop Lite Mounting
Note: The there are 2 main types of HDZero VTX Mounts. The above is for the HDZero Whoop Lite Board. You will need to remove both the upper and lower protective metal case (they simply pull off). You will also need to insert the provided rubber grommets.
Note: ESC is secured using 4 Nylon M3 Nuts.
The above image shows both the upper and lower TPU mounts without the Whoop Lite VTX. Basically sandwiched between both.
Foxeer HDZero VTX mounting
Similar to the Whoop Lite board, you will also need to insert the provided rubber grommets. The VTX is sandwiched between both upper and lower TPU mounts.
The above image shows both the upper and lower TPU mounts without the Foxeer HD VTX. Basically sandwiched between both TPU Parts.
The above illustrates location of Control Link RX Mounting location.
Browse more
- Browse all JS-2
- Browse all JS-3
- Browse all JS-1
- Browse all 5" FPV Frame Kits
- Browse all Quads
- Browse all Frame Kits
Why Choose Phaser FPV?
Here’s Why 1000s of Buyers Trust Us
In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.
Same-Day Ship
If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.
Transparent Stock
We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.
Highly Rated
We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!
Walk In Anytime
Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.
Tech Precision
Our handpicked team of technology experts specialize in – and are boffins on – every product we sell. This means they can answer any and all of your technical questions with confidence. Go ahead, put us to the test.
Fast Support
We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.
Get Rewarded
Score a FREE gift on first and recurring orders, and discount shipping on orders over $99.
We’re on Social
We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.
It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.
