Bambu Labs PETG Basic Filament

Are you looking to buy Bambu Labs PETG Basic Filament in Australia?

Looking for Bambu Labs PETG Basic Filament in Australia?

Known for impact and water resistance, high flexibility, strong layer adhesion, Bambu PETG Basic is ideal for printing tools (vises, tensioners, bag clips), toys (frisbees, boomerangs), water containers (bottles, watering cans), and outdoor items (planter pots, bottle cages) that require long-term exposure and withstanding impacts.

Less oozing, stringing and clumping

Improved with a modified formula, Bambu PETG Basic reduces clumping, oozing, and stringing issues during printing.

Excellent Light transmittance

With exceptional light transmittance, Bambu PETG Basic can achieve translucent or even transparent looks with particular printing settings.

Please note that the transparency of the prints may vary depending on factors such as size and structure, as well as printing parameters (including speed, nozzle temperature, and infill density).

Weight: 1kg

Accessory Compatibility

Parameters Comparison

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Recommended Printing Settings

• Drying Settings before Printing - 65 °C，8 h
• Pringting and Keeping Container's Humidity - < 20% RH (Sealed, with Desiccant)
• Nozzle Temperature - 240 - 270 °C
• Bed Tempreature (with PVP Glue) - 65 - 75 °C
• Printing Speed - < 200 mm/s

Physicial Properties

• Density - 1.25 g/cm³
• Vicar Softening Temperature - 78 °C
• Heat Deflection Temperature - 68 °C
• Melting Temperature - 225 °C
• Melt Index - 18.6 ± 2.2 g/10 min

Mechanical Properties

• Tensile Strength - 48 ± 5 MPa
• Breaking Elongation Rate - 11.2 ± 0.8 %
• Bending Modulus - 1790 ± 120 MPa
• Bending Strength - 81 ± 4 MPa
• Impact Strength - 52.7 ± 2.4 kJ/m²

Printing Tips

• Bambu PETG Basic is prone to string, oozing or sticking to nozzle when it gets wet. Recommended drying condition is 65 ℃ for 8 hours in a filament dryer, and 75 ℃ for 10 hours on a printer's heatbed. Learn more about filament drying. Please refer to Filament drying cover on WIKI.
• Due to the transparent properties of the filament, Lidar Extrusion Calibration can be affected when printing Transparent PETG. 
• Check Transparent PETG printing tips for recommended settings.
• To get shinier looks, set lower speeds and relatively higher temperatures. 

Included

• 1x Filament & Desiccant
• 1x Filament Label

Browse more

• Browse all Bambu Lab Filament
• Browse all Bambu Lab X1 3D Printer, Spare Parts & Accessories
• Browse all Bambu Lab P1P/P1PS 3D Printer, Spare Parts & Accessories
• Browse all Bambu AMS Spare Parts & Accessories
  
• Browse all Bambu Lab A1 Mini 3D Printer, Spare Parts & Accessories
• Browse all Bambu Labs
• Browse all Printer Spare Parts
• Browse ASA Filament
• Browse ABS Filament
• Browse Nylon Filament
• Browse PC Filament
• Browse PETG Filament
• Browse PLA Filaments (also PLA+)
• Browse PVA Filament
• Browse Silk Filament
• Browse Speciality Filament
• Browse TPU Filament 
• Check out all our 3D Printing Supplies