Are you looking to buy Bambu Labs PLA Marble Filament in Australia?
Looking for Bambu Labs PLA Marble Filament in Australia?
Bambu PLA Marble mimics the appearance of natural stone.
With inorganic particles in its composition, it offers a vivid stone-like texture that resembles marble, granite, or bricks. It adds a touch of nature to your prints and provides a stunning finish for your projects.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Recommended Printing Settings
- Drying Settings before Printing - 55 °C，8 h
- Pringting and Keeping Container's Humidity - < 20% RH (Sealed, with Desiccant)
- Nozzle Temperature - 190 - 230 °
- Bed Tempreature (with PVP Glue) - 35 - 45 °C
- Printing Speed - < 250 mm/s
Physicial Properties
- Density - 1.22 g/cm³
- Vicar Softening Temperature - 57 °C
- Heat Deflection Temperature - 56 °C
- Melting Temperature - 156 °C
- Melt Index - 32.2 ± 4.5 g/10 min
Mechanical Properties
- Tensile Strength - 42 ± 3 MPa
- Breaking Elongation Rate - 6.7 ± 0.5 %
- Bending Modulus - 2490 ± 150 MPa
- Bending Strength - 85 ± 5 MPa
- Impact Strength - 24.0 ± 2.5 kJ/m²
Included
- 1x Filament & Desiccant
- Instructions & Spool sticker
- 1x Filament Label
Browse more
- Browse Prusament Filament
- Browse ASA Filament
- Browse ABS Filament
- Browse Nylon Filament
- Browse PC Filament
- Browse PETG Filament
- Browse PLA Filaments (also PLA+)
- Browse PVA Filament
- Browse Silk Filament
- Browse SLA Resin
- Browse Speciality Filament
- Browse TPU Filament
- Check out all our 3D Printing Supplies