Are you looking to buy Bambu Labs PLA Basic Filament 1.75mm 1kg in Australia?
Looking for Bambu Labs PLA in Australia?
Bambu Labs PLA comes with NO SPOOL. You will need to twist your other Bambu Labs spool and pull it apart and place this one in. Also, place your RFID tag on the spool so that your Bambu Labs AMS system can auto-detect it. Please see the diagrams below for more info.
RFID for Intelligent Printing]
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Recommended Printing Settings
- Drying Settings before Printing - 55 °C,8 h
- Pringting and Keeping Container's Humidity - < 20% RH (Sealed, with Desiccant)
- Nozzle Temperature - 190 - 230 °
- Bed Tempreature (with PVP Glue) - 35 - 45 °C
- Printing Speed - < 300 mm/s
Physicial Properties
- Density - 1.24 g/cm³
- Vicar Softening Temperature - 57 °C
- Heat Deflection Temperature - 57 °C
- Melting Temperature - 160 °C
- Melt Index - 42.4 ± 3.5 g/10 min
Mechanical Properties
- Tensile Strength - 39 ± 2 MPa
- Breaking Elongation Rate - 12.2 ± 0.4 %
- Bending Modulus - 2750 ± 60 MPa
- Bending Strength - 76 ± 3 MPa
- Impact Strength - 26.6 ± 2.8 kJ/m²
Printing Tips
- For better print results, please reduce the Max Volumetric speed from 21 mm³/s to 15 mm³/s when printing PLA Basic Silver/Gold/Bronze.
Print Your Own Spool Now
Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!
Instructions for Printed Spool
When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).
Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.
Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.
Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.
Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).
Step 2. Tear apart and pull out the plastic strips.
Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.
Included
- 1x Filament & Desiccant
- 1x Instructions & spool sticker
- 1x Filament Label
Browse more
- Browse Prusament Filament
- Browse ASA Filament
- Browse ABS Filament
- Browse Nylon Filament
- Browse PC Filament
- Browse PETG Filament
- Browse PLA Filaments (also PLA+)
- Browse PVA Filament
- Browse Silk Filament
- Browse SLA Resin
- Browse Speciality Filament
- Browse TPU Filament
- Check out all our 3D Printing Supplies