Are you looking to buy a GEPRC CineBot30 HD FPV Drone in Australia?
The GEPRC Cinebot30 is a new generation of Cinematic FPV drones developed by GEPRC team. The high-strength 7075 aircraft-grade aluminum alloy bracket for FPV camera is a combination of classic engineering and aesthetics. The newly polished gimbal damping module can easily fix high-frequency vibration and jello issues. This drone can be mounted with GEPRC Naked GoPro Hero 8, GoPro Black Bones, Insta 360 GO2 and other cameras for a stable and clear image!
Choose a Receiver Option:
- TBS Crossfire
- ELRS 2.4GHz
- PNP
Choose 4S or 6S Option:
- 2450KV（6S)
- 3450KV（4S)
Note: Action Camera is not included.
VIDEO:FIRST LOOK! - GEPRC Cinebot30 HD O3 4K FPV Drone Review
Features
- Aviation 7075 aluminum alloy camera mounting bracket and fuselage aluminum column
- Powerful 1804 motors with surging torque to deal with ultra-low altitude
- impact-resistant PC material for injection molding
- Design that combines engineering and aesthetics
- Highest image quality is 1080P 60FPS
- Delay is as low as 30 milliseconds
- Tuned by GEPRC professionals
- Highest bit rate is 50MBPS
- GEP-F722-45A AIO V2
- Quick-disassembly
- DJI O3 Air Unit
- Jello reduction
DJI O3 AIR UNIT
Integrating DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight, compact design. See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!
HIGH STRENGTH COMPONENTS
This drone adopts high-strength one-piece injection-molded propeller guard and high-toughness and impact-resistant PC material for injection molding. A ring-shaped Cob light strip is embedded in the propeller guard, and the light effect is carefully tuned. High-strength grain-cut carbon fiber sheets mean the overall strength of the fuselage is upgraded again!
HIGH SPEED MOTORS
The Cinebot30 is equipped with a powerful 1804 motor with an optimized motor magnetic circuit and surging torque, which can easily cope with ultra-low altitude shooting. With the HQ prop T76mm*3 propellers, it gets the lowest noise effect in its class.
MAKING IT SIMPLE
Using a GEP-F722-45A AIO V2 flight controller provides a higher performance redundancy, with easy handling of unexpected situations. The finely polished frame design uses only 6 screws to separate the aircraft top plate and protection frame, which provide a simple removal to replace accessories.
Specifications
- Recommended Battery: LiPo 4S 1100mAh-1300mAh (4S Version) / LiPo 6S 850mAh-1100mAh(6S Version)
- Video resolution: 4K@50/60fps, 2.7K@50/60/100/120fps, 1080p@50/60/100/120fps
- Motor: SPEEDX2 1804-2450KV（6S Version）/ SPEEDX2 1804-3450KV（4S Version）
- Weight: 234.7.2g (excluding battery, the above are TBS Nano RX version)
- Receiver: PNP, TBS Nano RX, ELRS 2.4G
- Model: Cinebot30 HD Quadcopter
- Charger connector: XT60H-M
- Propeller: HQ prop T76mm
- FC: GEP-F722-45A AIO V2
- MCU: STM32F722RET6
- Bottom plate: 1.5mm
- Isolation Plate: 2mm
- Wheelbase: 127mm
- VTX: DJI O3 Air Unit
- IMU: ICM-42688-P
- Frame: GEP-CT30
- Main plate: 3mm
- Antenna: DJI O3
- Camera: DJI O3
- Brand: GEPRC
Includes
- 1x GEPRC CineBot30 3" HD FPV Drone w/ DJI O3 (Choose 4S or 6S and Receiver)
- 1x GoPro camera mount holder
- 1x Battery strap M15*200mm
- 1x Battery strap M15*220mm
- 2x HQProp T76MM（pair）
- 2x Battery Silicone Pads
- 1x Set of screwdrivers
- 1x Antenna fixed tube
- 1x Set of screws
