Are you looking to buy a FETtec AIO 35A 4 IN 1 ESC in Australia?
Features:
FC:
-
Latest STM32G4 Processor
-
170Mhz + Math accelerator
-
MPU6000
-
Supply voltage 12-25V (3S-6S Lipo voltage)
-
2x dedicated onboard 5V BEC for VTX (max. 600mA each)
-
5V BEC for RX
-
5V/16V BEC for VTX (switchable and real Pit*)
-
-
1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems
-
VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3
-
-
2x 4 pin connector for receiver and VTX
-
Signal, telemetry, 5V, gnd
-
Gnd, 5V, TX1, RX1
-
-
5 UART serials
-
UART 1 free
-
UART 2 used for Receiver
-
UART 3 free
-
UART 4 used for onboard OSD, can be set free
-
UART 5 used for ESCs / TLM / Onewire
-
-
Solder pad for RGB LEDs
-
Supported ESC protocols
-
PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
-
-
KISS FC firmware
*real Pit-Mode: A power supply pin which is remotely switchable
ESC:
-
Active current limiting @ 35A
-
Input voltage: 3s-6s
-
High quality 40V MOSFETs
-
STM32G071 @ 64MHz
-
up to 128 kHz Motor PWM
- Full sine wave control
-
Automatic input signal detection
-
PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
-
-
FETtec ESC firmware
OSD:
-
Onboard OSD
-
Graphic OSD (STM32)
-
Full KISS Tuning
-
Filter (PIDs, Rates, Settings)
-
LED control (RGB LED, Racewire)
-
VTX
-
Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)
-
KISS GPS support + live map
-
Custom graphic pilot logo
-
Stick overlay
-
Custom layout
-
can be deactivated for usage of digital systems
-
-
Connector type: JST-SH-1mm
Dimensions:
-
Maximum outside dimensions: 30 x 37,5mm
-
Mounting hole arrangement: 20 x 20mm with M2 mounting hole (expandable to M3)
-
-
Overall height: 7,9mm
-
Weight: 8,9 g
Software:
KISS Firmware - Softwareupdate via FETtec Configurator
FETtec ESCs Firmware - Softwareupdate via FETtec Configurator
FETtec OSD - Softwareupdate via FETtec Configurator
Scope of delivery:
1x FETtec AIO 35A
1x Capacitor 50V 470µF
2x 4 pin cable with JST connector on one side
1x 8 pin cable with JST connector on one side
Standoffs
View our FETtec product range here.
View all other drone escs.
Why Choose Phaser FPV?
Here’s Why 1000s of Buyers Trust Us
In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.
Same-Day Ship
If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.
Transparent Stock
We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.
Highly Rated
We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!
Walk In Anytime
Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.
Tech Precision
Our handpicked team of technology experts specialize in – and are boffins on – every product we sell. This means they can answer any and all of your technical questions with confidence. Go ahead, put us to the test.
Fast Support
We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.
Get Rewarded
Score a FREE gift on first and recurring orders, and discount shipping on orders over $99.
We’re on Social
We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.
It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.