-22%Coming Soon

Sunlu Filadryer S1 Filament Dryer Storage Box

$64.00 $50.00


Mix & Match Filaments for bulk discount across our whole range.

Qty Discount Coupon Code
Buy 10 8% Off BULKFILAMENT10
Buy 20 10% Off BULKFILAMENT20
Buy 40 12% Off BULKFILAMENT40
Add to Wishlist

Are you wanting to buy Sunlu Filadryer S1 Filament Dryer in Australia?

The Sunlu Dryer S1 is perfect for consumers, artists, and designers. It is an integrated solution for drying 3D printing filament and keeping it dry while printing, which can improve print quality and increase the fun of 3D printers.

By reducing moisture in your filament your 3D printing quality will increase dramatically.

In Australia moisture in the room and even when filament comes sealed in a bag sits between 25-50% humidity. With a Heater box at 40-55 degrees, you can reduce this down to 8-15% and see vast improvements in printing quality.

Most 3D printing filament easily absorbs moisture from the air. And when the moisture content in the filament increases, the print quality decreases, and can even cause prints to fail!

Phaser FPV ultimate filament drying guide

Dry your filament with the Sunlu Filament Dryer & use it while printing with a Dryer Mount. You can monitor the humidity in the Sunlu Dryer with our Humidity Sensor & Humidity Mount  When printing is finished, store it in the airlock bags and remove air with NanoVac Pump. You can then place a Humidity Sensor in our spool adapter and have a good gauge of humidity on the spool when you go to print again. It may require drying again for optimal results however it won't take as long because of the storage in the bags. You can even stack all your filament on top of each other once they are in the airlock bags. Be careful of any sharp filament ends and certain spools that have sharp areas as this can puncture the bags.

In the past three years, SUNLU team has conducted in-depth research efforts to solve this problem. They finally came up with a powerful solution: Fila Dryer S1.

SUNLU Team conducted a print quality comparison, printing the same 3D model with the same filament and printer. The model printed before drying showed poor print quality and rough surface, while the same model printed after drying the filament showed much-improved print quality and a smooth surface.

The appearance of the SUNLU FilaDryer S1 is beautiful from top to bottom. The transparent top lets you see your filament, and prevents dust accumulation.


Hold Two Rolls of 0.5kg Filaments

 Two Filament Outlets

Compatibility of SUNLU FilaDryer S1

The best temperature corresponding to filaments of different materials:

Sunlu Filadryer S1 Specifications

  • 1. LCD Display: 2-inch - Displays temperature and time.
  • Dual temperature probes to measure the temperature of the cabinet and heating plate.
  • Wrapped baking, more uniform heating, better baking effect
  • Heating temperature adjusted: which is convenient for customers to use at different temperatures (35℃~55℃ range)
  • Timing function: set heating timing, set time, enter the standby state, safe and secure
  • Power Supply - Australian Plug GW-Power GW48W - 24v 2A 48W

Package includes

  • 1x Sunlu Filadryer
  • 1x AU Power Supply

PhaserFPV Recommendations to further improve this Sunlu Dryer

1. Sunlu Dryer Fan Mod (see blog)
We found that it is only drying the bottom of the filament roll well and not the top as good. By adding a fan, you and circulate the heat and drop the humidity even more, keep the box hotter, and it does the whole roll, not just the bottom.

2. Install a Sunlu Dryer Spool Guide. (You must print yourself, not included and not required, just something we found can help).

3. Use a Dryer Mount for your printer
After 15 revisions and 3 weeks of testing, we are happy to release a custom mount for Prusa and Crealitely/tevos. 


Why Choose Phaser FPV?

Here’s Why 1000s of Buyers Trust Us

In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.

Same-Day Ship

If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.

Transparent Stock

We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.

Highly Rated

We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!

Walk In Anytime

Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Gosford NSW Australia. You’ll get to meet one of our friendliest – and fluffiest – employees, the Phaser FPV house dog, Piper!

Fast Support

We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.

We’re on Social

We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.

It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV, 3D Printing and PEV Vehicles, don’t settle for less. Demand the best – insist on Phaser FPV.

Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page


Select your currency