Polymaker Polymax PLA 3D Printing Filament (1.75mm) 750g

$43.00 $31.00


Color: Black

  • Black
  • White
  • Grey
  • Red
  • Blue
  • Green
  • Yellow
  • Orange
  • Polymaker Teal
  • Purple
Out of stock

Bulk Discount across all our filament

Qty Discount Coupon Code
Buy 10 11% Off BULKFILAMENT10
Buy 20 13% Off BULKFILAMENT20
Buy 30 15% Off BULKFILAMENT30
Order in H, M, Seconds (before 1pm AEST) for same day despatch
Add to Wishlist

We accept the following payment methods

Are you looking to buy Polymaker PolyMax PLA Filament in Australia?

PolyMax™ is a family of advanced 3D printing filaments produced with Polymaker’s Nano reinforcement technology, to deliver exceptional mechanical properties and printing quality.  PolyMax™ PLA is an incredibly easy-to-print filament with improved mechanical properties,  making it an excellent alternative to ABS.  


Superior Toughness - PolyMax™ PLA is an easy-to-print engineering material which  displays an increased impact strength up to 5 times that of PolyLite™ PLA and 20% better  than ABS. This is achieved through the implementation of Polymakers Nano-reinforcement  technology which dramatically improves impact resistance and fracture toughness of the  material without compromising printing quality.  

Strong, Durable and Ductile – Combining strength, durability and ductility, PolyMax™ PLA  is the perfect candidate for professional & educational environments where product design  iteration requires a reliable prototyping process and a ductile material. Ductility is the ability of  a material to exhibit plastic deformation before fracture, the opposite of ductile materials can  be seen as brittle materials. In simple words, PolyMax™ PLA will bend instead of breaking.  

Jam-Free™ technology - PolyMax™ PLA is manufactured with Polymakers Jam-Free™  technology which improves the heat stability of the filament with softening temperatures over  140°C and leads to excellent printing quality with zero risk of nozzle jams caused by heat  creep [1]. 

Easy-to-print - The outstanding mechanical strength of PolyMax™ PLA is achieved with no  compromise in printing quality. PolyMax™ PLA can be printed without a heated bed and  works well with common printing surfaces, though a heated bed can be used to achieve better  results (maximum 60°C). 

Uncompromised Quality - PolyMax™ PLA filament is made with the highest quality  ingredients including Ingeo® from Natureworks. Natureworks is a world-leading biopolymers  supplier based in the USA with a portfolio of high quality raw PLA materials produced  from rapidly renewable plant resources. Combining Polymakers innovative R&D technologies,  compounding and extrusion systems with Natureworks Ingeo® resins produces a reliable 3D  printing filament to print durable and accurate prototypes.  

[1] Heat creep is the process of heat spreading irregularly throughout the hot end, one common example is with  all metal hot end designs. Once heat creeps towards the cold end, the PLA filament softens prematurely in the  cold end and expands resulting in a jam. Polymakers Jam-Free™ technology increases the heat resistance of the  filament itself (not the printed part) to 140˚C which prevents the filament from prematurely softening in the cold  end and can still melt rapidly once entering the heating zone. The printed part will have the same heat resistance  as regular PLA: ~60˚C 


Print Settings 


Properties (X-Y) 

Thermal Properties 




190˚C – 230˚C  

Printing Speed:  

40mm/s – 60mm/s  

Bed Temperature:  25˚C – 60˚C  

Bed Surface:  

Glass with glue,  

Blue Tape, BuilTak®  

Cooling Fan:  


Note: Printing  

conditions may vary  with different  

printers and nozzle  diameters 

Young’s Modulus:  1879 ± 109 Mpa  

Tensile Strength:  28.1 ± 1.3 Mpa  

Bending Strength:  48.0 ± 1.9 Mpa  

Charpy Impact  


12.1 ± 1.0 kJ/m2 

Glass Transition  



Heat Deflection  


(0.45 MPa):  


Heat Deflection  


(1.8 MPa):  


Vicat Softening  




1.17-1.24 g/cm3  


Support Materials:  PolyDissolve™ S1,  PolySupport™  

Product Manual:  

Contact Us  

Technical Data  


Contact us  

Safety Data Sheets:  Contact us 

Disclaimer: The typical values presented in Polymakers data sheet are intended for  reference and comparison purposes only. Due to the nature of 3D printing they should not  be used for design specifications or quality control purposes.  


Storage: It is recommended to store PolyMax™ PLA in the PolyBox™ to prevent moisture  absorption which will lower the quality and the mechanical properties of the print. If the  filament has absorbed moisture it can be dried at 55˚C for 6 hours in a convection oven.


Browse more

Why Choose Phaser FPV?

Here’s Why 1000s of Buyers Trust Us

In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.

Same-Day Ship

If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.

Transparent Stock

We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.

Highly Rated

We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!

Walk In Anytime

Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.

Fast Support

We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.

We’re on Social

We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.

It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.

Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

Polymaker Polymax PLA 3D Printing Filament (1.75mm) 750g

$43.00 $31.00