Coming Soon

iFlight SucceX-D Mini F7 TwinG Stack V1.1 (F7+45A ESC) FC07526+SE11674 EOL

$140.00 (inc. GST)

CURRENTLY IN STOCK

Add to Wishlist
SKU: 16681N/A W/H W-02-B-14 N/A Categories: Drone ESCs , FPV Stack Combos , iFlight , Tags: 20x20, 4 in 1, 40 Amp, Blheli32, iFlight

Are you looking to buy Iflight SucceX-D Mini F7 TwinG Stack in Australia?

The SucceX-D Mini F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.
But the real magic of this flight controller lies in its TWIN GYRO configuration.
The TwinG uses two identical gyros oriented side by side with one offset 90 degrees from the other. Betaflight uses GYRO FUSION to blend and average the information from both gyros to send a much cleaner signal to the PID loop controller! Less noise and fewer oscillations across the throttle band without adding any delay! Betaflight software filters can be lowered in most cases as well, which brings a significant decrease in delay.
With plenty of processing power and UARTS, this is also the perfect flight controller for long-range GPS builds. And the TwinG configuration makes it the perfect FC for builds like macro quads, cinematic filming rigs and x-class racers that are a bit trickier to tune.

FC // SucceX-D Mini F7

  • MCU: 216MHz STM32F722
  • Gyro:2x ICM20689
  • Blackbox:32MB
  • Betaflight OSD: YES
  • BEC: 5V 2.5A / 9V 2.5A
  • Current sensor scale:  100
  • Inverter for SBUS input (UART2-RX)
  • Smartaudio & Tramp VTX protocol supported
  • Beeper pad : Yes
  • RSSI input pad: No
  • UARTs:5
  • Motor outputs: 4
  • 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
  • 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
  • BLHeli32 Telemetry:RX5
  • Input voltage:recommended 2-6S, MAX 6S
  • Firmware target:  IFLIGHT_F722_TWING
  • Mounting pattern: 20*20mm φ3
  • Dimensions:   29*29mm
  • USB type-C

 

ESC // SucceX Mini 45A 2-6S BLHeli_32 Dshot600 4-in-1 ESC

  • Features
    • 4x F051 MCU processers
    • TDK MLCC Low ESR ceramic capacitors
    • 6 layers single-board stacking PCB board
    • 48Mhz Runs BLHELI 32.X Firmware
    • 2-6s LiPo battery compatible
    • 45A per channel, 55A burst
    • Onboard current sensor
    • Supports DShot150/300/600/MultiShot/OneShot etc.
  • Specifications
    • Input: 2-6s LiPoly
    • Constant: 45 Amps (per channel)
    • Burst: 55 Amps (per channel)
    • BEC: No
    • BlHeli32 telemetry: Yes
    • Dimensions: 31x29.5mm
    • Mounting Holes: 20*20mm φ3mm
    • Weight: 6.7g (without motor wires)
    • Target: iFlight-F051-4IN1

Package includes:

  • 1pc x SucceX-D F7 Mini TwinG Flight Controller
  • 1pc x SucceX Mini 45A 4in1

Browse more

iFlight-logo – MultiGP Drone Racing League | FPV Racing League

Why Choose Phaser FPV?

Here’s Why 1000s of Buyers Trust Us

In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.

Same-Day Ship

If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.


Transparent Stock

We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.

Highly Rated

We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!

Walk In Anytime

Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Gosford NSW Australia. You’ll get to meet one of our friendliest – and fluffiest – employees, the Phaser FPV house dog, Piper!

Fast Support

We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.

We’re on Social

We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.

It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV, 3D Printing and PEV Vehicles, don’t settle for less. Demand the best – insist on Phaser FPV.

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

USD

Select your currency