Sold Out

iFlight ProTek35 HD CineWhoop w/ Walksnail Avatar HD FPV Goggles - ELRS RTF

$1,087.00 USD


Style: 3200KV

  • 3200KV
  • 2300KV
Add to Wishlist

We accept the following payment methods

Are You Looking for Iflight ProTek35 HD CineWhoop w/ Walksnail Avatar HD FPV Goggles RTF In Australia?

 After our very popular 3inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series, we were trying to increase performance and reduce weight for an even better and longer flight experience for a wide variety of use. 

Our all new 3.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what we're talking about here... 

ProTek is not necessarily just a Cinewhoop series but far more. Equipped with our all new 2203.5 motors for more power and less heat. We were able to increase speed and thrust by 50% compared to it's 3inch predecessor which gives a lot more room for a lot more fun. Our GPS measured maximum speed was above 120km/h and a maximum thrust of 750g per motor (3kg in total) would even carry heavier cams than a Gopro but also do some loaded punch outs or light freestyle moves. 

A lot of thought was put into the different assembly options. Our stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization). 

Durable plastic protectors with copper standoffs, portable compact design, easy accessable UBS port without disassembly, LED battery status, lost model buzzer and a universal GoPro TPU for a full size or naked GoPro. If you wanna go extra light, get one of our 5V balance plug GoPro power cables to get rid of the internal battery.


  • ProTek35 Prop Guards V2.0
  • No Props or frame in view!
  • High performance True-AIO Board Beast Whoop F7 AIO 55A to save weight and space
  • T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
  • Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
  • Low Resonance frame construction (Less Jello, more Cinematic footage)
  • Caddx Polar Vista Digital HD System
  • Butter smooth 2205 3200KV (4S) / 2205 2300KV (6S)
  • Pre-tuned with smooth freestyle settings

Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!


ProTek35 BNF Specs:

  • Motor: XING 2205 3200KV (4S) / XING 2205 2300KV (6S)
  • Top and bottom plate spacing: 20mm (aluminum standoff height)
  • FC pattern: 25.5*25.5mm / 20*20mm
  • Board Beast Whoop F7 AIO 55A
  • Weight: 348.3g (without battery)
  • Bottom plate thickness: 3.5mm
  • Body Size: 118*94.5mmmm
  • Top plate thickness: 2mm
  • FPV cam spacing: 20mm
  • Propeller size: 3.5 inch
  • Wheelbase: 151mm


FC // Beast F7 AIO 55A V2

  • Mounting pattern: 25.5*25.5mm φ3mm
  • FC Firmware:IFLIGHT_F745_AIO_V2
  • Blackbox: 16MB Onboard Flash
  • Dimensions: 32.5*32.5mm
  • MCU: BGA-STM32F745
  • Connector: Micro-USB
  • BEC output: 5V 2.5A 
  • Barometer: NO
  • Gyro: BMI270
  • Weight: 8.5g


ESC // 55A 2-6S

  • Mounting pattern: 25.5*25.5mm/Φ3mm
  • Constant: 55A / Burst: 60A
  • ESC Firmware: G-H-30 BLS
  • Dimensions: 32.5*32.5mm
  • Current Sensor: Yes
  • Current scale: 100
  • Input: 2-6S LIPO
  • BLHeli: BLHeli-S
  • Telemetry: no
  • Uarts: 5


Commando8 Specification:

ELRS module: ExpressLRS 915MHz or 2.4GHz (inbuilt in back of the radio)

  • 915MHz system: SX1276
  • 2.4GHz system: SX1280

BASE 2.4G Module:

  • Supported Protocols: Futaba S-FHSS/Frsky D16/Frsky D8
  • 2.4GHz system: CC2500

Antenna options:

  • Dual-Band (915MHz+2.4GHz)
  • Single-Band (915MHz)
  • Single-Band (2.4GHz)

Control interface:

  • 2x 2-position switches (can be used for arming; not momentary)
  • 2x 5-axis menu buttons for full OpenTX or EdgeTX control
  • 2x 3-position switches


RF Power: 

  • BASE 2.4GHz Multiprotocol // Max Output 100mW
  • ExpressLRS 915MHz // Max Output 1000mW
  • ExpressLRS 2.4GHz // Max Output 500mW
  • Input: Mini High Precision Hall Gimbals with NMB bearings
  • Battery: Built-in 4000mAh 1S2P 18650 Battery
  • Charging: Type-C 20W Quick Charge
  • Charging Connector: Type-C=
  • Radio Channels: 8
  • Weight: 310g

ProTek35 HD Quad RTF Included Components and Parts

1 x Commando 8 Radio Transmitter-ELRS (2.4G/915Mhz as optional)

2 x Nazgul 3535 propeller (Set of 4 - Color May Vary)

1 x iFlight Lipo Strap 15*250mm (Color May Vary)

1 x iFlight Lipo Strap 15*200mm (Color May Vary)

1 x Walksnail Avatar Digital HD FPV Goggles

4 x Crystal LHCP Short Omni Antennas

1 x Pre-built and Tested ProTek35 HD

Browse More

Browse All Iflight

Browse All HD

Browse All RTF


Why Choose Phaser FPV?

Here’s Why 1000s of Buyers Trust Us

In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.

Same-Day Ship

If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.

Transparent Stock

We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.

Highly Rated

We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!

Walk In Anytime

Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.

Fast Support

We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.

We’re on Social

We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.

It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.

Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page