Are you looking to buy an IFlight Nazgul5 V2 in Australia?
The iFlight Nazgul5 V2 is a 5" size BNF (Bind-and-Fly) quadcopter that comes with the Caddx Ratel, 2.1mm Camera, and Nazgul 5 inch 3-blades Propellers. This quad is the updated version of the XL5 V5 FPV frames. The Nazgul5 V2 has been pre-tuned and set up with everything you need, all you need to do is bind-and-fly! The Nazgul5 V2 is loaded with lots of power; it comes with the XING-E 2207（6S 1800KV / 4S 2750KV) motors, SucceX-E F4 Flight Controller, SucceX Force 5.8g 800mW VTX Adjustable, SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC, which make this quad a must-have!
Note: The color of propellers may vary, the color strap may vary, GoPro and GoPro mount NOT included
Features
- 5mm arm design for more durability
- Easy-Swap arm
- LED illuminated Logo
- XING-E 2207 motors and NAZGUL 5140 props
- 5" version also fits 5.1" style propellers
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x and 20x stacks
Specifications
- SucceX-E F4 45A flight stack
- XING-E 2207 FPV Motor（6S 1800KV / 4S 2750KV)
- Wheelbase: 240mm*240mm
- Body size: 170*170mm
- Propeller size: 5 inch /5.1 inch
- FC pattern: 30.5*30.5/20*20 mm
- FPV cam spacing: 19mm
- Weight: 393.4g (without battery)
FACTORY SETUP and WIRING DIAGRAM
This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some more software tweaks enhance the flight experience.
FC // SucceX-E F4 Flight Controller
- MCU：STM32F405
- Gyro：MPU6000
- Betaflight OSD：YES
- Blackbox：8MB
- 4X Uarts（1 2 3 6 )
- 8 x Dshot/Proshot/Oneshot output
- 8 x individual ESC power/ signal pads
- 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
- VTX telemetry: YES
- WS2812 led Strip：YES
- Baro：No
- Beeper：YES
- Input：2-6S（Max 8S）
- BEC：5V/2.5A cont
- Firmware target : BETAFLIGHTF4
- Mounting：30.5*30.5mm，φ4mm with Grommets φ3mm
- Dimensions：36*36mm
- Weight：7.6g
ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC
- Dimension: 40*43mm
- Mounting Holes: 30.5*30.5mm/Φ3mm
- Weight: 14.4g
- Supports 2-6S Lipo input
- STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware
- Current sensor: YES
- BEC: NO
- Supports: DShot150/300/600/1200/MultiShot/OneShot etc.
- Target: G-H-30 BLS 16.7
VTX// SucceX Force 5.8g 800mW VTX Adjustable
- The output power is stable;
- Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;
- Output 48 frequency points,
- Frequency lock fast, the boot does not interfere with companions;
- Built-in output power self-check function;
- Full format video format: NTSC /PAL;
- Wide input voltage range. low power consumption:
- 7V～36V，+12V/380mA@800mW;
- -Small size:36*36*3mm
- Mounting holes 4-M3
- Lightweight: 7.2g(excluding antenna)
VTX Specifications
- Item: SucceX-Force 800mW adjustable VTX
- Input Voltage:
- Output voltage/ Max current: 5V 1A
- 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW，250mA@500mW, 380mA@800mW
- Output 48 frequency points,
- size:36*36*3mm
- PIT/25mW/200mW/400mW/800mW
Recommended Parts (Not Included)
- Battery 4S 1550mAh
- Battery 6S 1300mAh
- GoPro Mounts
Includes
- Prebuilt and tested Quadcopter
- 1 x XL5 V5 Frame
- 1 x Caddx Ratel, 2.1mm lens camera
- 1 x Albatross RHCP RP-SMA 5.8g antenna
- 2 sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
- 1 x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
- 1 x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)
Browse more
Browse all iFlight
Browse all BNF
Browse all Quads
Why Choose Phaser FPV?
Here’s Why 1000s of Buyers Trust Us
In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.
Same-Day Ship
If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.
Transparent Stock
We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.
Highly Rated
We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!
Walk In Anytime
Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.
Tech Precision
Our handpicked team of technology experts specialize in – and are boffins on – every product we sell. This means they can answer any and all of your technical questions with confidence. Go ahead, put us to the test.
Fast Support
We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.
Get Rewarded
Score a FREE gift on first and recurring orders, and discount shipping on orders over $99.
We’re on Social
We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.
It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.