Sold Out

Happymodel X12 AIO 5-in-1 Board - ICM42688-P F4 FC + 12A ESC w/ ELRS Receiver

$76.00 USD


Add to Wishlist

We accept the following payment methods

Are you looking to buy a Happymodel X12 AIO 5-in-1 Board in Australia?

The Happymodel X12 is a 5-in-1 AIO board featuring an F4 Flight Controller, onbard 12A 4-in-1 ESC, 5.8GHz OpenVTX, and three different receiver options: PNP, FrSky, or ELRS. This AIO is great for brushless whoops with its great RX an VTX range!

5-in-1 AIO flight controller using OpenVTX (up to 400mW), 12A ESC (BLHeli_S ESC), onboard ELRS receiver (2.0 firmware), plugin connector for your motors and can take 1S or 2S batteries.

Notes: This is the V2 version capable of taking up to 2S.


  • FC:
    • Betaflight firmware target: CRAZYBEEF4SX1280
    • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
    • Sensor: ICM42688P
    • Mount hole size: 25.5mm*25.5mm
    • Power supply: 1-2S battery input (DC 2.9V-8.7V)
    • Built-in 12A (each) Blheli_S 4in1 ESC
    • Built-in Betaflight OSD (SPI Control)
    • Built-in 5.8G OpenVTX 0mw~400mw
    • Built-in ExpressLRS 2.4G,
    • Built-in voltage meter sensor: voltage meter scale 110
    • Built-in current meter sensor: current meter scale 470
    • Weight: 5.1g
  • 4in1 ESC:
    • Power supply: 1-2S LiPo/LiPo HV
    • Current: 12A continuous peak 15A (3 seconds)
    • Supports BLHeliSuite
    • Factory firmware: Z_H_30_REV16_7.HEX
    • Default protocol: DSHOT300
    • Supports Bluejay firmware
    • When using Bluejay firmware with 48khz, set startup power to 1100/1200
  • Receiver:
    • Packet rate options: 50Hz/150Hz/250Hz/500Hz
    • ExpressLRS firmware version: V2.0
    • RF frequency: 2.4GHz
    • Antenna : SMD antenna
    • Telemetry output Power: <12dBm
    • Receiver protocol:  SPI ExpressLRS
    • Compatible with ExpressLRS V2.0 TX Modules
    • Can’t flash ExpressLRS firmware separately
  • OpenVTX:
    • Firmware version: OPENVTX
    • Smartaudio v2.1
    • PIT mode supported
    • RACE mode supported
    • Channels: 48ch
    • Transmitting Power: 0/RACE/25mw/100mw/400mw
    • Power supply: DC 5V
    • Current (5v): <650ma (400mw)
    • Antenna connector: U.FL


  • 1x X12 AIO Board
  • 1x Dipole UFL Antenna
  • 1x Camera cable
  • 1x PH2.0 Pigtail
  • 1x set of screws and grommets

Browse more

Why Choose Phaser FPV?

Here’s Why 1000s of Buyers Trust Us

In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.

Same-Day Ship

If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.

Transparent Stock

We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.

Highly Rated

We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!

Walk In Anytime

Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.

Fast Support

We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.

We’re on Social

We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.

It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.

Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page