-8%Sold Out

Happymodel Mobula6 HDZero 65mm HD Brushless whoop with HDZero Nano Lite Camera

$242.00 $224.00


Style: ELRS Receiver

  • ELRS Receiver
Add to Wishlist

We accept the following payment methods

Are you looking to buy a Happymodel Mobula6 HDZero 65mm HD Brushless whoop with HDZero Nano Lite Camera in Australia?

The Happymodel Mobula6 HDZero is the very first 65mm HD brushless whoop in the World, weights less than 23.5 grams only!


  • Brand Name: Happymodel
  • Model: Mobula6 HDZERO
  • Frame wheelbase: 65mm
  • Weight: 23.5 gram without battery
  • Size: 80mm*80mm*50mm
  • Receiver option:
  • SPI ELRS 2.4GHz
  • Compatible with 1S Lipo battery or Lihv battery(Not include)
  • Battery Plug: PH2.0

Recommend 3.8v LiHV 1S 300mAh LiPo Battery

Flight controller SuperbeeF4 Lite ELRS

  • SPI ELRS version Firmware target: CrazybeeF4SX1280
  • MCU:STM32F411CEU6 (100MHz, 512K FLASH)
  • Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection)
  • Power supply: 1S Lipo Lihv battery input (DC 2.8V~4.35V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Built-in Betaflight OSD(SPI Control)
  • Built-in SPI ExpressLRS receiver
  • Built-in 5V 1A BEC
  • Built-in voltage detection

Onboard 4in1 ESC

  • MCU upgraded to EFM8BB21
  • Power supply: 1S LiPo/LiPo HV (2.8v~4.35v)
  • Currents: 5A continuous peak 6A (5 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: O_H_5_REV16_8.HEX
  • Default protocol: DSHOT150/DSHOT300/DSHOT600

Onboard SPI ExpressLRS 2.4GHz Receiver

  • Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
  • RF Frequency: 2.4GHz
  • Antenna plug: IPEX
  • Telemetry output Power: <12dBm
  • Receiver protocol:  SPI ExpressLRS
  • Could bind with ELRS V2.0 firmware TX module


  • Mode: EX0802 19000KV
  • Configu-ration:9N12P
  • Stator Diamter:8mm
  • Stator Length:2mm
  • Shaft Diameter:Φ1mm
  • Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
  • Weight(g):1.7g
  • No.of Cells(Lipo):1S only

Propeller Gemfan 1210 Bi-blades

  • Weight:0.19g
  • Material: PC
  • Pitch:1 inch
  • Props Dia:30mm
  • Center Hole Dia:1mm

HDZero Nano Lite Camera

  • 14x16x11mm
  • 1.5gram
  • 0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor
  • Excellent low light performance
  • Fov:
  • 4:3: D:130° H:108° v:84°
  • 16:9:D:122° H:108° V:65°

HDZero Whoop Lite VTX

  • 1S Input
  • 25mW/200mW RF Output-SmartAudio Support
  • 25.5×25.5 M2 Soft Mounting- Antenna Retention
  • Removable Shielding Box- 32.5×32.5mm(29x29mm inner)
  • 4.5grams/4mm Thickness (without shielding)

Package Included:

  • 1* Happymodel Mobula6 HDZero 65mm frame+Canopy
  • SPI Receiver Option1: SuperbeeF4 Lite FC built-in ExpressLRS SPI RX
  • 4*EX0802 KV19000 Unibell brushless motor
  • 1*Gemfan 1210 31mm propeller(4cw+4ccw)
  • 1*HDZero Nano Lite Camera
  • 1*HDZero Whoop Lite VTX
  • 1*Spare Canopy
  • 1*Propeller disassemble tool
  • 1*Screw driver

Browse more

Why Choose Phaser FPV?

Here’s Why 1000s of Buyers Trust Us

In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.

Same-Day Ship

If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.

Transparent Stock

We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.

Highly Rated

We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!

Walk In Anytime

Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.

Fast Support

We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.

We’re on Social

We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.

It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.

Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page