Are you looking to buy a HappyModel Moblight Ul;tralight 1S Brushless Whoop in Australia?
Introducing the Moblite6 Ultralight FPV Whoop! The Moblite6 features the RunCam Nano4 Lite, Onboard SPI Frsky D8 Receiver, DiamondF4 FR FC, 5A BLheli_S 4-in-1 ESC, 5.8GHz VTX, and more! This mini and lightweight whoop (65mm) will take you to hard-to-get places!
Features
- The lightest 1s 65mm brushless whoop
- Powerful and efficiency
- The lightest 1s AIO 5IN1 F4 flight controller
- New Unibell EX0802 brushless motors
- VTX power switchable 25mw~200mw
- Low profile Canopy design
Specifications
- Brand Name: Happymodel
- Item Name: Moblite6 1S 65mm ultra-light brushless whoop
- Wheelbase: 65mm
- Size: 80mm*80mm*25mm
- Weight: 18.5g (without battery)
- Weight:26g(with Original 1s 300mah Lipo battery )
Motor
- Mode: EX0802 19000KV
- Configu-ration:9N12P
- Stator Diamter:8mm
- Stator Length:2mm
- Shaft Diameter:Φ1mm
- Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
- Weight(g):1.7g
- No.of Cells(Lipo):1S only
Flight Controller
- (Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4F
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: MPU-6000(SPI connection)
- Original whoop size compatible
- Power supply: 1S battery input (DC 2.9V-4.35V)
- Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
- Built-in Betaflight OSD(SPI Control)
- Built-in 5.8G VTX
- Built-in SPI Frsky/Flysky receiver
- Built-in 5V 1A BEC
Onboard 4-in-1 ESC
- MCU upgraded to EFM8BB21
- Power supply: 1S LiPo/LiPo HV
- Current: 5A continuous peak 6A (3 seconds)
- Support BLHeliSuite programmable
- Factory firmware: O_H_50_REV16_8.HEX
- Default protocol: DSHOT600
Onboard Frsky SPI D8 Receiver Version
- SPI BUS receiver Frsky D8 compatible
- Compatible Non-EU transmitter D8 model
- Channels: 8ch
- Failsafe support
- No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m
Onboard 5.8GHz VTX
- Output power: 25mw~200mw switchable
- Frequency: 40CH
- Input voltage: 3.3V 5.5V
- Current consumption: 300mA(type)
- Frequency: 5.8GHz 5bands 40 channels(include Race band)
- Smart audio ready
Runcam Nano 4 Lite
- Model: RunCam Nano4 Lite
- Image Sensor: 1/3" CMOS
- Horizontal Resolution: 800TVL
- Lens : 2.1mm(M8) FOV 160°
- Signal System: PAL/NTSC Non-Switchable
- S/N Ratio: >50dB
- Electronic Shutter Speed: Auto
- Auto Gain Control (AGC): Auto
- Min. Illumination: 0.01Lux@1.2F
- D-WDR: Auto
- Day/Night: Color
- Power:DC 3-5.5V
- Current: 170mA@5V 180mA@3.3V
- Housing Material: ABS
- Net Weight: 1.0g
- Dimensions: L14mm*W12mm*H9mm
Lipo Battery
- Capacity:300mAh
- Voltage:3.8v
- Continuous Discharge Rate: 30C
- Size: 57mmx12mmx7mm
- Weight: 7.5g
- Connector: PH2.0
Includes
- 1 x 65mm Frame (Mobula6 frame)
- 1 x Option1: DiamondF4 FR built-in SPI Frsky receiver
- 4 x EX0802 KV19000 Unibell brushless motor
- 1 x Gemfan 1219 31mm propeller(4cw+4ccw)
- 1 x Runcam Nano4 Lite
- 1 x Built-in 5.8G 40ch 25mw-200mw VTX
- 2 x 1s 300mah Lipo battery
- 1 x 1S USB charger
- 1 x Propeller disassemble tool
- 1 x Screwdriver
- 1 x Happymodel Carry case
Browse more
- Browse all HappyModel
- Browse all Whoops
- Browse all BNF
Why Choose Phaser FPV?
Here’s Why 1000s of Buyers Trust Us
In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.
Same-Day Ship
If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.
Transparent Stock
We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.
Highly Rated
We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!
Walk In Anytime
Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.
Tech Precision
Our handpicked team of technology experts specialize in – and are boffins on – every product we sell. This means they can answer any and all of your technical questions with confidence. Go ahead, put us to the test.
Fast Support
We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.
Get Rewarded
Score a FREE gift on first and recurring orders, and discount shipping on orders over $99.
We’re on Social
We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.
It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.
