Are you looking to buy an Energetic Bambu Labs X1 257.5x257.5mm PEI Coated/Textured Spring Steel Sheet Build Plate in Australia?
- This bed is DOUBLE SIDED
- NO MAGNET
- The textured side is BLACK in PEI PRO HF Version
- The textured sides have the PHASER FPV logo in Red at the bottom
- These are made by Energetic
Please note these beds are made by a third party and NOT by Bambu Labs.
Take your printing to the next level with a PEI-coated build sheet. Never worry about glue sticks, painter's tape, or prints not sticking to your bed again, simply clean the bed with isopropyl alcohol, press print, and when your print has finished flex your build sheet and the print will pop right off.
Never warp & Never rust.
Easy to get the first layer even for a new user
Flexible, Removable, stick to magnets very well
- Lasts 6-12 months or more depending on care and usage.
Recommend print temps
PLA – 60C
PETG – 70-80C
ABS – 100-110C
Product Usage Guidelines
PLA/PETG/PCTG/ABS/Nylon (General Hard Plastics)
Warning: If you are not careful with your 1st layer you can risk bonding the PETG/PCTG/Nylon to the PEI surface. This will damage the surface. To prevent damage to the surface apply gluestick before printing PETG/PCTG on the PEI
Removal: Make sure your plate is close to room temp (under 30C) before removing parts. If you remove the print when it is still hot it is more likely to damage the surface. Easily remove 3D prints on the printer by removing the spring steel plate, flexing it, and popping the print off. It's simple and makes the print removal process much easier.
TPU/TPE (Flexible Materials)
Recommended printing on TEXTURED SURFACE ONLY.
Removal: Set heat bed to 100°C, Allow bed to reach at least 80°C, Pull part at the same time as spraying isopropyl around the part to release it from the build sheet then turn heater bed off.
- Browse all Spring Steel Bed Sheets
- Browse all Bambu Lab Filament
- Browse all Bambu Lab X1 3D Printer, Spare Parts & Accessories
- Browse all Bambu Lab P1P/P1PS 3D Printer, Spare Parts & Accessories
- Browse all Bambu AMS Spare Parts & Accessories
- Browse all Bambu Lab A1 Mini 3D Printer, Spare Parts & Accessories
- Browse all Bambu Labs
Why Choose Phaser FPV?
Here’s Why 1000s of Buyers Trust Us
In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.
If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.
We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.
We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!
Walk In Anytime
Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.
Our handpicked team of technology experts specialize in – and are boffins on – every product we sell. This means they can answer any and all of your technical questions with confidence. Go ahead, put us to the test.
We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.
It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.