Are you looking to buy CLRACING Heli-Nation Talon F7 - We Ship Australia Wide!
The Heli-Nation Talon F7 20x20 Flight Controller is a fantastic FC perfect for your quad. With an F7 processor and 8S capable, Talon is a great 20X20 with STM32F722RET6 216MHz processor. Built in Betaflight OSD, 6 UARTS, and dedicated LDOs for cleaner gyro and OSD signals makes Talon F7 the most powerful 20X20 FC on the market. One of the features Talon F4 customers praised is the choice of using the 8 pin harness or direct soldering motor ports to the ESC. Heli-Nation has kept that option, while still adding even more features, by letting customers remove the plastic connector to reveal motor ports. The 8 pin harness will be a direct pinout for the Aikon 20X20 6S ESC!
**WARNING! If you remove the JST connector to direct solder, the pinout is not the same as the JST connector. Please use the diagram below to see the correct pinout. Please pay attention to VBAT and Ground!
- MCU: STM32F722RET6 216MHz
- MPU 6000
- Built in Betaflight OSD
- Up to 8S (36V) direct battery power
- Buzzer pads for external buzzer
- Build in voltage monitoring resistor
- 5V 2A BEC
- Dedicated LDO for gyro for cleaner gyro signal
- Dedicated LDO for OSD for cleaner OSD signal
- Led strip shares 5V with 5V/2A BEC
- 6 UARTS: UART1,2,3,4,5,6
- Built in camera control pin with resistor and capacitor
- 4 Full UARTS with RX/TX pins
- Logical pin layout for the cleanest build possible
- 8 pin 4 IN 1 ESC plug (Direct solder to motor ports underneath)
- Remap able LED pad for additional motor output
- 16M Blackbox flash chip
- TX3 & RX3 can be used for I2C for external compass
- 5V or 3.3V selectable receiver power
- 5V, VBAT selectable VTX and CAM power
- pin connector (Aikon compatible)
- 8 grommets M4 to M3
- M3 to M2 nut adapters
- M3X5 standoffs
Why Choose Phaser FPV?
Here’s Why 1000s of Buyers Trust Us
In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.
If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.
We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.
We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!
Walk In Anytime
Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.
Our handpicked team of technology experts specialize in – and are boffins on – every product we sell. This means they can answer any and all of your technical questions with confidence. Go ahead, put us to the test.
We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.
It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.