BetaFPV Twig XL 3" FPV Toothpick Quad BNF 2021 Version

$234.00

CURRENTLY IN STOCK

Option one: Frsky FCC

  • Frsky FCC
  • TBS Crossfire
$234.00
Out of stock

Order in H, M, Seconds (before 1pm AEST) for same day despatch
Add to Wishlist
SKU: 13123N/ACategories: BetaFPV , BNF Quads , Quadcopter Parts , Sub 250g , Toothpick Frames Tags: BetaFPV, BNF

Are you looking to buy BetaFPV Twig XL 3' FPV Toothpick Quad in Australia?

TWIG XL FPV Toothpick Quad is the first joint quad with Racer X FPV since 2020 Feb. In 2021 June, the new version comes back with 3.5inch propellers and a series of improvement.

This TWIG XL X version frame is definitely the most popular frame at present. The performance and power to weight ratio of this frame design is out of this world! With the Caddx Ratel Camera, 1404 3800KV Brushless Motors, 12A Toothpick F4 2-4S AIO FC, it supports 450mAh 4S battery and provides you a super efficient flight experience. What is more, we adopt the injection molded canopy, protecting your camera well even in a several severe crashing.

Specifications

  • Weight: 105g (without battery)
  • Motors: 1404 3800KV Brushless Motors
  • Frame: TWIG XL Frame
  • Receiver Option:Frsky XM+  / TBS Crossfire
  • Recommend Battery: 450mAh 4S battery (NOT included)
  • Flight time: 3:00-5:00mins

Here is the comparison of the two version of TWIG XL quadcopter in difference.

2021 Version 2020 Version
FC Board 20A F4 2-4S AIO FC V3 12A F4 2-4S AIO FC
Camera Caddx Ratel 2 Caddx Ratel
5.8G VTX M02 25-350mW A01 25-200mW
Propellers 3.5inch 3-blades 3inch 3-blades
Canopy X-Knight Canopy Mini Canopy

TWIG XL Frame

TWIG XL frames are premium 3mm thick, high-grade T700 carbon cut along the weave and chamfered on both sides interior and exterior edges at .7mm.  All the frames are approximately 140mm motor post to motor post and swing up to 3” or 3.5" props. The frames accommodate motor mounting for 4-hole 9x9 or 12x12 motor mounts. 

Is the original TWIG XL frame compatible with 3.5inch propellers already? The answer is YES.

Gemfan 3520 or HQ 3520

Gemfan 3520 3-Blade propellers and HQ 3520 3-Blade propellers are available for your choice to be installed on TWIG XL FPV Toothpick Quad. The three-blade design with 3.5 inches propeller diameter can provide your quadcopter with strong power off the ground.

If you want smooth freestyle flying with TWIG XL drone, recommend the Gemfan 3520 3-Blade propellers.

If you want powerful racing flying with TWIG XL drone, recommend the HQ 3520 3-Blade propellers.

X-Knight Canopy

The X-Knight canopy comes with TWIG XL is suitable for all mini cameras which are the 19*19mm or 20*20mm mounting hole, like Caddx Vista or DJI FPV unit camera, Caddx Turtle V2, RunCam Racer 3. It could provide full protection to the camera len.

This canopy could provide wider camera tilt angle from 10-50 degree.

Package

 

  • 1 * TWIG XL 3'' FPV Quad
  • 1 * Gemfan 3520 3-Blade Props (4pcs)
  • 1 * HQ 3520 3-Blade Props (4pcs)
  • 1 * Set of M2*7 screws for propellers

Browse more

Beta65x HD Micro Drone - Buy Betafpv Beta65x HD in Australia – Phaser FPV

Why Choose Phaser FPV?

Here’s Why 1000s of Buyers Trust Us

In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.

Same-Day Ship

If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.


Transparent Stock

We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.

Highly Rated

We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!

Walk In Anytime

Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Gosford NSW Australia. You’ll get to meet one of our friendliest – and fluffiest – employees, the Phaser FPV house dog, Piper!

Fast Support

We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.

We’re on Social

We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.

It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV, 3D Printing and PEV Vehicles, don’t settle for less. Demand the best – insist on Phaser FPV.

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

USD

Select your currency

BetaFPV Twig XL 3" FPV Toothpick Quad BNF 2021 Version

Frsky FCC
Frsky FCC
$234.00