Are you looking to buy an Alpha A65 Tiny Whoop in Australia?
Let's welcome the iFlight Alpha series, a new way to fly FPV!
The iFlight Alpha A65 V2 is an even smaller size 65mm lightweight 24.5g whoop. This version features an updated canopy, frame, motors, AIO Board, and camera. Stuffed with our newest electronic components and technology, this thing will guarantee hours of practice or racing across even the smallest spaces. The Alpha A65 is your answer to the problem of flight time efficiency while maintaining sufficient power.
Features
- Butter smooth XING 0803 (more torque and efficiency with longer flight times)
- Ducts to protect the sensitive environment or yourself
- Pre-tuned with smooth cinematic settings
- 1200TVL 2.1mm 160° Camera
- 24.5 grams (without battery)
V2 UPGRADES
- April 20, 2022: Before SucceX F4 1S 5A AIO Whoop Board w/VTX changed to BLITZ F411 1S 5A Whoop AIO Board
- January 2022: Before XING 0802 22000KV changed to XING 0803 17000KV
- Upgraded Canopy and Boby Frame
- Upgraded Camera
Specifications
- Motors: XING 0803 17000KV FPV Micro Motor
- AIO: BLITZ F411 1S 5A AIO Whoop Board
- Flight time: 3-4 min cruising (1S 300mAh)
- Camera: 1200TVL 2.1mm 160° Camera
- Weight: 24.5g (without battery)
- Propellers: HQProp 31mm
- FC Pattern: 25.5x25.5mm
- Propeller Size: 31mm
- Body size: 46x46mm
- Wheelbase: 65mm
- Antenna: Whip
BLITZ F411 1S 5A WHOOP AIO BOARD
- Weight: 4.8g (with power cable, VTX, and VTX antenna)
- Mounting pattern: 25.5*25.5mm/φ3mm (half-hole)
- Supported Protocols: CC2500, SPI, D8, S-FHSS
- FC Firmware: IFLIGHT_BLITZ_F411RX
- BEC output: 5V 500mA
- Connector: Micro-USB
- MCU: STM32F411
- INA pad: n uart2
- Barometer: NO
- Size: 29*29mm
- Gyro: BMI270
- Blackbox: NO
- Signal Support: Dshot, Oneshot, Multishot
- Current: 5A continuous and peak 6A
- ESC Firmware: O-H-30 BLS 16.8
- Current sensor: yes
- ESC Telemetry: NO
- Current scale: 400
- BLHeli: BLHeli-S
- Input: 1S
VTX
- Connector: UFL/IPEX
- Protocol: Smart audio
- Power: PIT/25/50mW
- Input voltage: 5V
- Channels: 48CH
FACTORY SETUP and WIRING DIAGRAM
This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some Betaflight tweaks to enhance the flight experience.
Reflashed your drone but didn't backup the setup? Messed up the whole tune and want our factory tune back?
No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive: LINK
TIPS
- VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.
- If you have none frsky transmitter,please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.
- Our current frsky receivers default version in 2.XX, requires to use the same version of frsky transmitter.
Includes
- 1x iFlight Alpha A65 Tiny Whoop Drone - Analog - V2 (Prebuilt and Tested)
- 2x HQ 31mmx3 1mm (Set of 4) - Color May Vary
- 1x MicroUSB Cable
Browse more
- Browse all BNF
- Browse all Analog BNF
- Browse all iFlight
Why Choose Phaser FPV?
Here’s Why 1000s of Buyers Trust Us
In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.
Same-Day Ship
If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.
Transparent Stock
We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.
Highly Rated
We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!
Walk In Anytime
Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.
Tech Precision
Our handpicked team of technology experts specialize in – and are boffins on – every product we sell. This means they can answer any and all of your technical questions with confidence. Go ahead, put us to the test.
Fast Support
We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.
Get Rewarded
Score a FREE gift on first and recurring orders, and discount shipping on orders over $99.
We’re on Social
We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.
It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.