Sold Out

FETtec FC G4-N v1.7 Flight Controller

$82.00 USD

CURRENTLY IN STOCK

Add to Wishlist

We accept the following payment methods

Are you looking to buy a FETtec FC G4-N v1.7 Flight Controller in Australia?

Product information "FETtec FC G4 - N v1.7"

What does "N" version mean? - NO Analog OSD.

This product has no onboard analog OSD. If you require analog OSD you may prefer the FETtec FC G4 v1.7 Flight Controller version

Digital OSDs can be used as usual.

There is also the option of connecting to a FETtec OSD board for using analogue systems. 

Here in comparison:

 G4-N-OSD-Comparison-NEW

Characteristics:

  • Latest STM32G473 processor

    • 180Mhz + Math accelerator
    • Gyro IIM-42652 SPI
  • Designed for 6-27V supply voltage (2S-6S Lipo)

  • 2x onboard BEC (2A each)

    • 5V BEC for RX
    • 5V/16V BEC for VTX (configurable and real Pit*)
  • Improved IO protection

    • All IOs of the microcontroller, eg in connectors or solder pads, are protected against voltage or current peaks
  • 2x 8 pin connector for solderless ESC connection

    • Connector 1: ESC signal 1-4, telemetry, VCC, GND
    • Connector 2: ESC signal 5-8 (depending on the selected UAV type 1-4), telemetry, VCC, GND
  • 1x 8 pin connector for solderless connection to VTX, camera and OSD of the digital systems

    • real Pit* VCC, GND, video in, video out, BEC 5V/16V, VCS/TX3, RX3

  • 2x 6 pin connector for serials

    • RX1, TX1, 3.3V, VCC, 5V, GND
    • RX3, VCS/TX3, RGB LED, VCC, 5V, GND
  • 1x 4 pin connector for receiver

    • Signal, TLM, 5V, GND

  • 5 UART serials

    • UART 1 free
    • UART 2 occupied by receiver
    • UART 3 free
    • UART 4 ​​free
    • UART 5 occupied by ESCs / TLM / Onewire
  • 4 ESC solder pads (Signal/GND) on each corner

  • Buzz pads

  • 4 tiny RGB LEDs (color selectable)

  • Supported ESC protocols

    • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

  • FETtec Alpha FC firmware (KISS FC firmware flashable)

  • Connector type: JST-SH-1mm

 

*real pit mode: switchable supply pad

 

Dimensions:

dimensionsO2BNL0T723GCJ

  • Maximum external dimensions: 37.2 x 37.2mm, without fastening straps 30 x 30mm

  • Arrangement of the mounting holes:

    • 20 x 20mm with M2 mounting holes (upgradable to M3)
    • 30 x 30mm with M3 mounting holes
    • 30 x 30mm mounting hole tabs are removable to reduce the overall size of the FC
  • Height: 7.9mm

  • Weight: 5.37g 

Firmware:

  • FETtec Alpha FC firmware (KISS FC firmware flashable)

Includes:

  • 1x FETtec FC G4-N v1.7
  • 1x open 8 pin cable (JST connector on one side)
  • 1x open 6 pin cable (JST connector on one side)
  • 1x open 4 pin cable (JST connector on one side)
Available downloads:

Browse more

Why Choose Phaser FPV?

Here’s Why 1000s of Buyers Trust Us

In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.

Same-Day Ship

If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.


Transparent Stock

We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.

Highly Rated

We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!

Walk In Anytime

Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.

Fast Support

We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.

We’re on Social

We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.

It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page