Are you looking to buy a FYSETC Voron V2.4 Kit in Australia?
Please note: this is a Parts kit only, printed parts are not included.
--------------------------------------------------------------------------------------------------------------
Before buying this kit please note the following disclaimers/information.
--------------------------------------------------------------------------------------------------------------
- If you have never touched a 3D printer, do not buy this kit.
- This is a significant project/build to undertake. DC electronics, advanced 3D printer knowledge is recommended. It is assumed you know how to crimp cables, own a crimper, and have sourced/printed the required 3D Parts to complete the build. Experienced Voron builders take 25-30 hours to complete a build. It's not uncommon for first-time builders to be taking 40-50 hours before everything is complete and ready to print.
- It is recommended you read the assembly manual in completion before committing to purchase and build a kit.
- Read our Voron Buying Guide & F.A.Q. in completion & note that we do not provide technical / building support via phone - We only support questions/support via email & discord.
Revision 1.1 BOM
Upgraded Specificaitons：
1. Add the extrusion head hub board Afterburner_Toolhead_X_PCB, and the hub board wiring harness with Teflon
2. Add the Z-axis limit switch board HARTK Z AXIS ENDSTOP MICROSWITCH PCB
3. A full set of labeled harnesses
4. Add PVC cable duct
5. Add hot bed insulation cotton
6. Add VORON Nevermore V5 Air Purifier
7. Equipped with Klicky-Probe leveling upgrade kit and Omron leveling switch
Bom：
|
Index |
Sort |
Component |
Qty |
|
1 |
Fasteners |
Voron V2.4 R2 fasteners Pack |
1 SET |
|
2 |
Motion |
GATES GT2 Open Belt LL-2GT-6 (6mm wide) - 1800/2000mm |
2 PC |
|
3 |
Motion |
GATES GT2 Open Belt LL-2GT-9 (9mm wide) - 1100/1200mm |
4 PC |
|
4 |
Motion |
GATES GT2 Belt Loop (6mm W) - 188mm |
4 PCS |
|
5 |
Motion |
GT2 20T Pulley (5mm ID 6mm W) 1PC remove end cap |
3 PCS |
|
6 |
Motion |
GT2 16T Pulley (5mm ID 6mm W) |
4 PCS |
|
7 |
Motion |
GT2 20T Pulley (5mm ID 9mm W) |
4 PCS |
|
8 |
Motion |
GT2 20T Toothed Idler (5mm ID 6mm W) |
2 PCS |
|
9 |
Motion |
GT2 20T Toothed Idler (5mm ID 9mm W) |
4 PCS |
|
10 |
Motion |
GT2 80T Pulley (5mm ID 6mm W) |
4 PCS |
|
11 |
Motion |
F695 Bearing |
20 PCS |
|
12 |
Motion |
625 Bearing |
12 PCS |
|
13 |
Motion |
5x60mm Shaft |
4 PCS |
|
14 |
Motion |
5x29.5mm Shaft |
1 PC |
|
15 |
Motion |
Linear Rail MGN9H 350/400mm |
7 PCS |
|
16 |
Motion |
Linear Rail MGN12H 350/400mm |
1 PCS |
|
17 |
Vibration Management |
Rubber Compressor Foot |
4 PCS |
|
18 |
Electronics |
Afterburner_Toolhead_X_PCB |
1 PC |
|
19 |
Electronics |
Afterburner_Toolhead_X_PCB Teflon wiring |
1 PC |
|
20 |
Electronics |
XY Microswitch Endstop / Z Endstop |
1 PC / 1 SET |
|
21 |
Electronics |
Omron TL-Q5MC2 - NPN Inductive Probe |
1 PC |
|
22 |
Electronics |
Omron G3NB-225B-1 SSR |
1 PC |
|
23 |
Electronics |
NEMA17 Motor 17HS19-2004S-C |
6 PCS |
|
24 |
Electronics |
NEMA17 Motor 42HS20401B-20-0.05M |
1 PC |
|
25 |
Electronics |
Mean Well LRS-200-24 PSU |
1 PC |
|
26 |
Electronics |
Inlet Power Socket IEC320 C14 |
1 SET |
|
27 |
Electronics |
40x40x10 Axial Fan (24V) |
1 PC |
|
28 |
Electronics |
40x40x20 Centrifugal Fan (24V) |
1 PC |
|
29 |
Electronics |
60x60x20 Fan (24V)kit（3 PCS） |
1 SET |
|
30 |
Electronics |
Keystone CAT6 Insert |
1 PC |
|
31 |
Electronics |
C13 Power Cord |
1 PC |
|
33 |
Controller |
sdcard 16GB |
1 PC |
|
34 |
Controller |
USB C cable |
1 PC |
|
35 |
Controller |
Spider Board |
1 PC |
|
36 |
Controller |
TMC2209 Stepper Motor Driver |
7 PCS |
|
37 |
Controller |
Mini 12864 Display |
1 PC |
|
38 |
Frame |
OpenBuilds Angle Corner Connector |
4 PCS |
|
39 |
Frame |
Misumi sectional profile Kit HFSB5-2020 SET |
18 PCS |
|
40 |
Misc |
PTFE Tube (4mm OD 2mm ID) - 1.5m |
1 PC |
|
41 |
Misc |
6x3mm Neodimium Magnet |
10 PCS |
|
42 |
Misc |
4mm Bowden Coupler |
1 PC |
|
43 |
Misc |
BMG Extruder Componnets Kit |
1 SET |
|
44 |
Misc |
E3D V6 Bowden Hotend Kit (24V) Titanium Alloy Bi-Metal Heatbreak |
1 SET |
|
45 |
Misc |
Heater φ6X15 24V 50W |
1 PC |
|
46 |
Misc |
Thermistor NTC 100K B3950 |
1 PC |
|
47 |
Misc |
DIN 3 Rails (35mm W) - 460mm |
2 PCS |
|
48 |
Misc |
DIN Rail Mount Bracket for G3A SSR |
1 PC |
|
49 |
Misc |
Fume Extractor Carbon Filter Element |
1 PC |
|
50 |
Misc |
3M VHB Tape 5952 |
1 PC |
|
51 |
Misc |
Foam Tape Thickness 1mm Length 5m |
1PC |
|
52 |
Misc |
Foam Tape Thickness 3mm Length 4m |
2 PCS |
|
53 |
Misc |
XH2.54 2/3/4 Pin Plastic shell |
1 SET |
|
54 |
Mics |
Zipties |
1 SET |
|
55 |
Cables |
Cable Kit（Pre-crimped terminals and longer wire lengths with label） |
1 SET |
|
56 |
Cables |
VORON 2.4 Chain Kit (1PC 15X10mm，2PCS 10X11) |
1 SET |
|
57 |
Panels |
Bottom/Back/Electronics Bay Panels |
3 PCS |
|
58 |
Panels |
Side/Front/Top Acrylic Panels |
4 PCS |
|
59 |
Buildplate |
MIC6 5/16" Plate - 305X305/355X355mm |
1 PC |
|
60 |
Buildplate |
Silicone AC Heater - 250X250/300x300mm (600/750W)+Thermal Fuse RH15A125（Pluggable） |
1 PC |
|
61 |
Buildplate |
JanusBPS Textured steel plate 305X305/355X355mm （One side pattern and the other side glossy PEI sticker） |
1 PC |
|
62 |
Buildplate |
Magnetic stickers 305X305/355X355mm thickness 2mm |
1 PC |
|
63 |
Buildplate |
Insulation cotton thickness 5mm |
1 PC |
|
64 |
Tool |
Cutting pliers |
1 PC |
|
65 |
Tool |
Hexagonal wrenchs |
1 SET |
|
66 |
Tool |
Thermal silica |
1 PC |
|
67 |
Mics |
PVC wiring duct 30x30mm |
1 SET |
|
68 |
Mics |
Wago 221-415 Terminals |
3 PCS |
|
69 |
Mics |
VORON Nevermore V5 |
1 SET |
|
70 |
Mics |
Weaving casing |
1 SET |
|
71 |
Mics |
The standby line 3m |
1 PC |
|
72 |
Mics |
Wiring diagram |
1 PC |
|
73 |
Electronics |
Klicky-Probe kit |
1 SET |
Browse more
- Browse all FYSETC Kits
- Browse all Voron Parts and accessories
Why Choose Phaser FPV?
Here’s Why 1000s of Buyers Trust Us
In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.
Same-Day Ship
If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.
Transparent Stock
We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.
Highly Rated
We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!
Walk In Anytime
Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.
Tech Precision
Our handpicked team of technology experts specialize in – and are boffins on – every product we sell. This means they can answer any and all of your technical questions with confidence. Go ahead, put us to the test.
Fast Support
We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.
Get Rewarded
Score a FREE gift on first and recurring orders, and discount shipping on orders over $99.
We’re on Social
We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.
It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.
