Are you looking to buy a BetaFPV Lite Radio 3 in Australia?
LiteRadio 3 Radio Transmitter is the newest remote control in the LiteRadio series. This transmitter features an ergonomically designed handle and has superb performance in its working time, newly updated gimbal, and multi-protocol support (Frsky version). Besides, this version supports BETAFPV Configurator which is a utility designed to simply update, configure, and tune the radio controller.
Features
LiteRadio 3 is a remote control radio transmitter designed primarily for RC models, including multirotor, aeroplanes. It gives you more than you ever thought possible from an entry-level 8-channel radio.
- 8 channels in total.
- USB Joystick support for most practice simulators.
- Nano module bay for external TX module.
- Newly designed joystick gimbal for longer usage life.
- Support BETAFPV Configurator for updating, configuring, and tuning.
- Provide ExpressLRS 2.4G protocol version and Frsky protocol version for option.
- Built-in 2000mAh battery and USB charge supported.
Bullet points
- LiteRadio 3 upgrades with BETAFPV self-developed Customized LiteRadio System. Pilots can directly operate the Joystick Calibration and Firmware Update on the radio transmitter, which is more convenient for the beginner racer to operate.
- Equipped with a built-in 2000 mAh 1S battery, LiteRadio 3 can work up to 15 hours without an external module, bringing an excellent endurance performance.
- Comes with a built-in charging module, LiteRadio 3 supports USB charging which is more convenient to use. Meanwhile, it designs a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously.
- Newly designed with a nano bay, it supports the external TX module. Highly recommend BETAFPV ELRS Nano Module, which is compatible with the LiteRadio 3 radio transmitter and makes CRSF protocol available.
- Adopted the rubber coat, LiteRadio 3 is ergonomic and has the shape of a gaming controller. It’s comfortable to hold, and the anti-slip texture on the handles allows for a solid grip.
- It is the safest and quickest method to get started by using a model practice simulator for starters. LiteRadio 3 radio transmitter supports most of the simulators on market with comprehensive configuration.
Specification
- Item: LiteRadio 3 Radio Transmitter
- Frequency Range: 2.4G
- 2.4G System: CC2500/SX1280
- Channel: 8
- Support Protocol: Futaba S-FHSS/Frsky FCC D16/Frsky LBT D16/Frsky D8, ExpressLRS 2.4G
- Power: ELRS version 25mW/50mW/100mW, Frsky version 100mW
- Adapted Drone Type: Multirotor, Airplane
- Support USB Charging / Firmware Update
- Support BETAFPV Configurator / Most Practice Simulator
- LED Light: Green-Power On / Red-Warning if the voltage is lower than 3.5V / Blue-Normal
- Battery: Built-in 2000mAh 1S Battery
- Charging Connector: USB 3.0 Type-C
- Supports external TX nano module
Improvements on LiteRadio 3
Compared with LiteRadio 2 SE, the LiteRadio 3 is equipped with a 2000mAh 1S battery, bringing an excellent endurance performance up to 15 working hours without an external module. Reserving a nano bay on the backside, it supports an external module for use with ELRS Nano TX Module, which supports CRSF protocol. Moreover, the LiteRadio 3 gimbal is newly updated with an accurate potentiometer and adjustable stick ends.
BETAFPV Configurator
BETAFPV Configurator is a utility designed to simplify updating, configuring, and tuning the radio transmitter.
- Basic radio controller setup, like mode switch, turn on/off RF modules.
- Full function of the ExpressLRS configuration, like outpower, packet rate, etc.
- Channel mixer for fix wing drones.
- Firmware update.
How to switch the protocol
Note: Switching internal protocol is only available for the Frsky version radio transmitter. ExpressLRS version can only switch to the external TX module.
To change protocols and TX module, here are the steps:
- Power the radio transmitter off;
- Press and hold the BIND button while powering the radio transmitter back on;
- Then the flash colour and times of the LED before buzzer alarms will change, according to the tables above.
FRSKY VERSION
- LED STATUS: Red flash once – Internal Frsky D16 FCC (ACCST 1.X Version)
- LED STATUS: Red flash twice- Internal Frsky D16 LBT (ACCST 1.X Version)
- LED STATUS: Red flash three times – Internal Frsky D8
- LED STATUS: Red flash four times – Internal Futaba S-FHSS
- LED STATUS: Purple flash free times quickly – Internal TX Module Off and Run External TX Module
EXPRESS ELRC VERSION
- LED STATUS: Red flash once – Internal ELRS
- LED STATUS: Purple flash free times quickly – Internal TX Module Off and Run External TX Module
Note: LiteRadio 3 Frsky version only works with D16 ACCST 1.X Frsky protocol. So if you use a Frsky receiver with D16 ACCST 2.X version or ACCESS version, the binding will fail.
Browse more
- Browse all Radio Transmitters
- Browse all BetaFPV
- Browse the Lite Radio 2
Why Choose Phaser FPV?
Here’s Why 1000s of Buyers Trust Us
In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.
Same-Day Ship
If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.
Transparent Stock
We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.
Highly Rated
We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!
Walk In Anytime
Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.
Tech Precision
Our handpicked team of technology experts specialize in – and are boffins on – every product we sell. This means they can answer any and all of your technical questions with confidence. Go ahead, put us to the test.
Fast Support
We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.
Get Rewarded
Score a FREE gift on first and recurring orders, and discount shipping on orders over $99.
We’re on Social
We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.
It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.