TBS Unify Pro 5G8 HV - RACE (SMA)

$25.00 USD

CURRENTLY IN STOCK

Out of stock
Order in H, M, Seconds (before 1pm AEST) for same day despatch
Add to Wishlist
SKU: 15173N/A W/H: V-04-E-14 N/A Barcode: N/A Shipping Weight: 10g N/A Categories: FPV Transmitters , TBS Team Black Sheep , TBS Video Transmitters VTX Tags: TBS, VTX

We accept the following payment methods

Are you looking to buy TBS Unify Pro Race in Australia? You have come to the right place!

The newly refreshed Unify Race is here! The U.FL connector now has screws over a tiny plate to hold it in place. The connections have changed to add an additional ground and data pin to allow you to wire audio and SmartAudio separately!

View other FPV Transmitters.
View other TBS FPV Transmitters.
View other TBS products.

Distilling the smallest, lightest and most powerful video transmitters (aka "the golden standard" :) ) down to a bare minimum for FPV racing, at a very attractive price!


MAIN FEATURES

  • Smallest, lightest video transmitter on the market
  • 2-6S input power supported
  • 25mW / 200mW power settings
  • Ultra-clean transmission (up to 16 pilots at once!)
  • PitMode - power up your quad during a race
  • Easy OSD, FC and RC channel changes, with fallback button menu
  • Robust RF amplifier allows powering up without antenna for hours!
  • Clean powerup and video switching
  • CE certified

 

PITMODE - MADE TO RACE

Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels. 

 

SMARTAUDIO V2 - FULL CONTROL

SmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!

 

CLEANSWITCH - NEIGHBOR FRIENDLY

CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)

 

SAY NO! TO DIPSWITCHES

Even though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies. 

 

SPECIFICATIONS

  • Operating Voltage: 2S - 6S
  • Supply current: 600mA
  • Operating Temperature: watch for normal airflow
  • Audio carrier Frequency: 6.5 MHz
  • Video Input Impedance: 75 Ohm
  • Weight: 7g (with SMA, without antenna)
  • Input Connector: JST GH 7pin (after July 2018)
  • Antenna Connector: SMA Female Socket with screw mounting holes, U.FL to VTx
  • Video Format: NTSC/PAL
  • Output Power: 13dBm (25mW), 23dBm (200mW)

 

INCLUDED

  • TBS UNIFY 5G8 Video transmitter
  • Video Transmitter pigtail cable


DOWNLOADS

* HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure.

Why buy TBS products from Phaser FPV in Australia?

  • Official reseller of TBS products in Australia. 
  • FREE gift on first and recurring orders
  • FREE shipping on orders over $120
  • FREE express* shipping over $250
  • Large Facebook Community for like-minded individuals.
  • Active on social media - Tag us or DM us!
  • Our staff flies & use these products regularly. Confused or not sure what to buy? Give us a call.
  • Visit us in-store in NSW - We are located 1 hour north of Sydney in Gosford.
  • Phaser started in 2012 - History of reputable store and 5 star reviews.
 
Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

TBS Unify Pro 5G8 HV - RACE (SMA)

$25.00