Sold Out

OSEQ Safe sheet 240x245mm Suits 235x235mm Heatbed (fits ender3/5)

$43.00 USD

CURRENTLY IN STOCK

Add to Wishlist

We accept the following payment methods

Are You Looking To Buy A OSEQ SAFE Sheet for 235X235mm Heatbed In Australia?

Premium quality double-sided 3D printing plate for 235x235mm heatbed (Ender 3 pro, BIQU B1 and others...). The sheet is 240mm wide and 245mm high, fits Ender 3 pro, Ender 5 pro,BIQU B1. Does not fit Artillery Genius and other printers with no space between the heatbed and the printer structure! Velvety smooth premium PEI powder surface for amazing adhesion surface. Attaches magnetically. Flexible. Smart hot surface indicator. Easy oil visibility. 

Print Surface

- Original ULTEM™ (PEI) powder coated surface, the best you can get

- Long lasting: print surface keeps its properties for years (if you take a good care of it)

- Velvet texture: bottom part of the print is flat and smooth (ideal for glued parts)

- Amazing adhesion for all standard materials including PLA, PETG, ABS, TPE, TPU, PP or PA.

- No need for a glue or an adhesion spray

- Double sided: print from both sides

- Easy oil visibility: see oil or other grease

Hot Surface Warning

- Red color bar indicates temperatures over 40°C

- Don’t get burned again

- Ideal not only for kids, take care of your hands

Flexible and Magnetic

- Thick spring steel: bend the sheet to remove the finished print

- Strong magnetic connection to the heatbed: if your printer has a magnetic bed, the SAFE Sheet just snaps on.

- Does not come with a magnetic pad.

Why to pick the OSEQ Sheet

OSEQ Sheets are manufactured in the Czech Republic and all materials are sourced from the EU. This alone is a mark of quality. We take only the best materials we can find to guarantee the best printing experience possible. 

 

Here are some of the reasons we believe the OSEQ safe sheet is perfect choice for your 3d printer.

Amazing adhesion with original ULTEM™ PEI powder coated surface

The velvet-soft printing surface is coated with an extremely high quality ULTEM™ (PEI) powder, which adheres perfectly to the plate and does not form any bubbles, such as PEI foils on competitor products. But most importantly, our powder has a perfectly fine grain that is, dare we say, the best on the market. On an imaginary scale of smoothness between PEI foil, competing finishes including the renowned satin, our finish is at the top, just behind the PEI foil. So you may be wondering, is the competing PEI film even better? It's not, because it's too smooth and some materials don't stick to it - and more importantly, it tears and peels off the sheet, something our PEI powder finish doesn't do.

ULTEM™ (PEI) powder Velvet surface

We use the original ULTEM™ powder. What does that mean for you? Perfect adhesion of most commonly used materials, extremely easy separation of the print from the sheet when the print is finished, and last but not least, just plain fun! Simply carefree, safe 3D printing. 

You get a very subtle velvet-like texture on the bottom edge of the print.

Flexible spring steel

Once the print sheet has cooled down, you can remove the print without the need for a spatula or force. In the case of very tightly stuck prints, the spring steel allows the plate to be bent without damaging it. The sheet attaches magnetically to the printer, so it is essential that your printer has a magnetic print surface.

The sheet is double-sided, so if you accidentally scratch one side, for example, you can simply flip the sheet over and keep printing.

SAFE Hot Warning

The SAFE element lets you know if the surface of the plate is hot or cold and therefore safe to touch. This prevents burns and hand injuries. When heated, the entire SAFE element turns red and the text HOT SURFACE is displayed. After cooling down to a safe temperature, the text and the red color almost disappear again. However, they are still slightly visible so that anyone near the printer knows that the surface may get hot.

 

Although it may not seem like it, even briefly touching a hot surface can be dangerous! Touching a 50°C surface for just a few seconds can cause a 1st degree burn, which is like a light sunburn, and can dry or redden the skin. However, at 60°C this time is reduced to a mere touch. At temperatures of around 80°C and about 30 seconds of touching, a 2nd degree burn can occur! This will manifest itself, for example, in redness and pain at the point of contact and infection can occur. Thanks to the SAFE Sheet, it is not necessary to touch the printing plate, but just watch the SAFE element to see if it is still red.

Oil And Dirt, Always Visible

Our SAFE printing sheets are designed to make 3D printing really easy. One of the foundations of 3D printing success is a well degreased print surface. That's why our printing plates are black. Any grease is perfectly visible on the sheet as a dark contrasting spot, making it clear where the sheet needs more degreasing. This way you can avoid scavenging due to the first layer peeling off.

Print With All Standard Materials

SAFE Sheet is compatible with the usual range of materials like a PLA, PETG, PETG-HT, ASA, ABS, PC, CPE, PVA/BVOH, PP or FLEX.

Compared, Tested, Delivered

The only sheet with original ULTEM™ powder.

If you are looking for a replacement or upgrade of your printes default build plate, look no further. With OSEQ SAFE Sheet you get the best quality PEI powder surface, very smooth Velvet texture for strong adhesion and a HOT SURFACE indicator. This all delivered on a flexible, thick spring sheet plate for a great magnetic forces to keep to sheet on the bed. You also dont need any other replacement of your heat bed. If your printer has a magnetic bed, you are good to go with SAFE Sheet!

 

 

 

For your printer

The goal of OSEQ is to bring an extraordinary quality print sheet to every printer. We start with 3 sizes for Prusa MK3, Prusa MINI, and a more versatile size 235x235mm for printers like Creality Ender 3 pro, BIQU B1 and others. We are constantly growing our family.

Browse More

Why Choose Phaser FPV?

Here’s Why 1000s of Buyers Trust Us

In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.

Same-Day Ship

If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.


Transparent Stock

We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.

Highly Rated

We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!

Walk In Anytime

Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.

Fast Support

We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.

We’re on Social

We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.

It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page