Are you looking to buy a FETtec FC G4 v1.7 Flight Controller in Australia?
Characteristics:
-
Latest STM32G473 processor
- 180Mhz + Math accelerator
- Gyro IIM-42652 SPI
-
Designed for 6-27V supply voltage (2S-6S Lipo)
-
2x onboard BEC (2A each)
- 5V BEC for RX
- 5V/16V BEC for VTX (configurable and real Pit*)
-
Improved IO protection
-
All IOs of the microcontroller, eg in connectors or solder pads, are protected against voltage or current peaks
-
2x 8 pin connector for solderless ESC connection
- Connector 1: ESC signal 1-4, telemetry, VCC, GND
- Connector 2: ESC signal 5-8 (depending on the selected UAV type 1-4), telemetry, VCC, GND
-
1x 8 pin connector for solderless connection to VTX, camera and OSD of the digital systems
-
real Pit* VCC, GND, video in, video out, BEC 5V/16V, VCS/TX3, RX3
-
-
2x 6 pin connector for serials
- RX1, TX1, 3.3V, VCC, 5V, GND
- RX3, VCS/TX3, RGB LED, VCC, 5V, GND
-
1x 4 pin connector for receiver
-
Signal, TLM, 5V, GND
-
-
5 UART serials
- UART 1 free
- UART 2 occupied by receiver
- UART 3 free
- UART 4 occupied by OSD, can be used elsewhere depending on configuration
- UART 5 occupied by ESCs / TLM / Onewire
-
4 ESC solder pads (Signal/GND) on each corner
-
Buzz pads
-
4 tiny RGB LEDs (color selectable)
-
Supported ESC protocols
-
PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
-
-
FETtec Alpha FC firmware (KISS FC firmware flashable)
-
Updated onboard OSD
- Graphic OSD (STM32)
- Full KISS tuning
- Filters (PIDs, Rates, Settings)
- LED settings (RGB LED, Racewire)
- VTX
- Live data graphics (voltage, engine speed, current, engine temperature, gyro values, reception quality)
- KISS GPS support + Live Map
- Custom graphic pilot logo
- Stick Overlay
- Custom layout
-
Connector type: JST-SH-1mm
*real pit mode: switchable supply pad
Dimensions:
-
Maximum external dimensions: 37.2 x 37.2mm, without fastening straps 30 x 30mm
-
Arrangement of the mounting holes:
- 20 x 20mm with M2 mounting holes (upgradable to M3)
- 30 x 30mm with M3 mounting holes
- 30 x 30mm mounting hole tabs are removable to reduce the overall size of the FC
-
Height: 7.9mm
-
Weight: 5.37g
Firmware:
-
FETtec Alpha FC firmware (KISS FC firmware flashable)
-
FETtec OSD firmware
Includes:
- 1x FETtec FC G4 v1.7
- 1x open 8 pin cable (JST connector on one side)
- 1x open 6 pin cable (JST connector on one side)
- 1x open 4 pin cable (JST connector on one side)
Browse more
- Browse all FETtec Flight Controllers
- Browse all KISS Flight Controllers
- Browse all Flight controllers
Why Choose Phaser FPV?
Here’s Why 1000s of Buyers Trust Us
In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.
Same-Day Ship
If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.
Transparent Stock
We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.
Highly Rated
We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!
Walk In Anytime
Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.
Tech Precision
Our handpicked team of technology experts specialize in – and are boffins on – every product we sell. This means they can answer any and all of your technical questions with confidence. Go ahead, put us to the test.
Fast Support
We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.
Get Rewarded
Score a FREE gift on first and recurring orders, and discount shipping on orders over $99.
We’re on Social
We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.
It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.