So the other day I had a pretty big crash into mud..

IMG_20160515_160359 IMG_20160515_142255

The solution is to strip the motors apart, get a really hot container of water (boiling) and then jiggle it in until you get all dirt out.

I had to use a toothbrush in some parts (be careful)

Once you have got rid of dirt, you can also give it a blow with compressed air.

You will need to lube up the bearings again, I used some WD 40 and cleaned the whole motor as well with it then dryed it.


After I had pulled most dirt off.



Clean again!


Any suggestions or questions let me know